Applicable fibers

SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)

Fiber Count

Single

Cladding diameter

80 to150µm

Coating diameter

100 to1000µm

Fiber cleaved length

8to16mm with coating diameter of 250µm or less. 16mm with coating diameter of 250 to 1000µm. Optional Set-plate for 8 to 16mm with coating diameter of 250 to 1000µm is available

Actual average splice loss

0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS

Measured by cut-bak method relevant to ITU-T and IEC standards

Splicing time

Typical  9 sec

Return loss

> 60dB

Splicing mode

53(templet), 40(user)

Splice loss estimate

Available

Storage of splice result

The last 4000 results to be stored in the internal memory

Fiber view and magnification

300X magnification for single X or Y view; 150X magnification for X and Y view simultaneously, display direction can be changed.

Viewing method and display

Two CMOS cameras and 5.6 inch color LCD monitor

Fiber core can be displayed clearly

Operating condition

0 to 5000m above sea level, 0 to 95%RH and -1050, respectively

Tension test

2N

Electrode life

2500

Tube heating mode

9(templet), 24(user)

Tube heating time

Typical  30 sec

Applicable protection sleeve length

60mm, 40mm and a series of micro sleeves

No.of splice/heating with battery

Typical 150 cycles (splice/tube heat) with inner Li-battery

Power supply

AC 100-240V with AC adapter; inner Li-battery(8000mAH)

Terminals

USB 1.1 connector for PC communication, VGA connector for outer display

Wind protection

Max. wind velocity of 15m/s

Dimensions

150mm(length) x150mm (width) x150mm (height)

Weight

2.7 Kg excluding battery, 3.2 Kg including battery