It integrates the traditional PDH multiplexer and 1000Mbps Ethernet optical transceiver. It can be applied to ADM application.

Overview           

        

The RP1000 is optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It integrates the traditional PDH multiplexer and 1000Mbps Ethernet optical transceiver, and can realize the 4/8/16 E1s and four 1000Mbps Ethernet data channel transmission over optical line of 1.25Gb/s, the four 1000Mbps Ethernet data channel share 1000M bandwidth.

In point-to-point mode, the Ethernet transmission bandwidth can be doubled to 2.5G by setting the port-trucking function.

The RP1000 is designed as a modular system with several optional E1 cards and power cards to meet the various application requirements. It provides one optical Gigabit Ethernet interface (SFP optical module) and three electrical Gigabit Ethernet interfaces (RJ45 connector) compliant with IEEE802.3 serial standard.

It provides dual hot-pluggable optical interfaces to realize 1+1 optical protection, furthermore, it owns many humanize functions, such as Automatic Laser Shutdown (ALS), Remote Power down Detect (RPD), prevent Ethernet frames from looping back in case of unexpected optical loopback and so on. Ø 

It supports the management based on Command Line Interface (CLI). With the super terminal integrated by PC, user can realize the monitor and configuration of the device. It also supports Simple Network Management Protocol (SNMP).

With low power consumption, high integration and well stability, it is a cost-competitive solution for the application where gigabit Ethernet and E1 are required simultaneously, such as the telecommunication, the electric power and the finance fields.

 

Features

 

Compact design with 1U height, and can be installed on standard rack

 

Realizes up to 16 E1s and four 1000M Ethernet mixed multiplexing to optical fiber

 

Optical interface

Dual optical interfaces, SFP optical module (LC interface), Hot pluggingThe line bit rate is 1.25Gb/s, transmission distance is optional (depend on the SFP optical module)SFP MSA(INF-8074i), ITU-T G.695, FC-PI V2.0 standards compliableSupports 1+1 optical protection and Automatic Protect Switch (APS) with the recovering time less than 50msProvides optical loopback function, a great convenience for trouble shootingSupports ALS functionSupports Remote Power down Detect (RPD) function, which can be used to distinguish the failures of remote power down or fiber broken

E1 interface

Provides 4/8/16 E1 interfaces, compliant to G.703, and balanced/unbalanced selectableJitter tolerance, jitter transfer characteristic and jitter generation fully comply with ITU-T G.823 and G.742 recommendationsLocal/remote loop-back function supportedSupports device loop and E1 line loop controlled by the local side, which is convenient for E1 line testingSupports embedded E1 BERT function

Ethernet interface

One optical Gigabit Ethernet interface and three electrical Gigabit Ethernet interfaces compliant with IEEE802.3 serial standardThe electrical gigabit Ethernet interfaces adopt RJ45 connector, support auto-negotiation, which can work in 1000M full-duplex, 100M full/half-duplex, 10M full/half-duplex modeThe optical gigabit Ethernet interface adopts 1000M SFP module, which can work in 1000M full-duplex mode;Proprietary technique (patent pending) adopted to prevent Ethernet frames from looping back in case of unexpected optical loopbackSupports unicast, multicast and broadcast frameSupports flow control and broadcast storm filtering control4K MAC address tableSupports MAC address dynamic learning functionSupports port rate control functionSupports port-based VLAN and IEEE 802.1Q tag-based VLANSupports QinQ(Double Tag VLAN)Supports port trunking/aggregating function

Network management interface

Supports CLI based on RS232 (CONSOLE) management interfaceSupports CLI based on Ethernet (EMU) management interface (TELNET)Supports Simple Network Management Protocol (SNMP, V1 and V2C)Implements the device alarm and status monitor, port loop configuration, etc.

Supports one RS232 user channel in point-to-point mode

 

Perfect alarm indication and performance statistic

 

Supports hot-spare power, the power consumption is less than 12W

-48V DC single power access-48V DC double power access220V AC single power access220V AC double power access-48V DC&220V AC double power access

SNMP based Gigabit Ethernet and 16 E1s to optical fiber multiplexer PDH