1) splice loss and good consistency. 2) small size, light weight, easy to operate
HM-103 ribbon fiber coupler
• The main features of1) the accuracy and reliability of optical fiber ribbon cable docking: HM-103 8-core coupler with fiber with a core fixture, precision ceramicV-groove butt ribbon fiber will be connected in a V-tank followed by two optical fiber butt-coupled to ensure fiber buttAccurate and reliable;2) low-docking losses: HM-103 8-core coupler docking loss and average loss of a single fiber is not more than 0.5dB;3) Small size, light weight, easy to carry.• Use Fiber ribbon temporary alignment for PLC splitter to produce light through and test through light, instead of ribbon splicing machine.• The main technical indicators:Applicable fiber: 8-core ribbon fiber;Cladding diameter: 125μm;Core loss: loss of a single fiber is not greater than 0.5dBOperating temperature: -10 °C ~ 40 °CDimensions: 140mm × 80mm × 77mmWeight: 0.9kg• steps:1) Prepare a light source, power meter, thermal stripping pliers, cutters, with a core clamps and jumper welding good ribbon fiber;2) Turn the power meter and light source, and preheat for more than one hour;3) 8-pin coupler activities end to the maximum position; with fiber fixture in a suitable location is fixed;4) access to fiber jumper light source jumper with fiber end first fixture fixed with fiber into the hot stripping pliers stripping with fiber, and then together with the fixture into the fiber cleaver to the face cut flat, and finally put fixed the left side of the 8-pin coupler, the bare fiber into the V groove, then head pressure;5) the jumper side of the measured optical fiber according to the left side of the order followed by insertion power meter, with the fiber end of the first fixture strap fiber, then add hot stripping pliers to peel with fiber, and then together with the fixture into the fiber cutter will cut flat face, and finally put the 8-pin coupler right side of the fixed bare fiber into the V-groove, and a drop in the middle of the V groove matching fluid, and then the pressure head pressure;6) counter-clockwise rotating knob activities end the free movement of the V-slot Fibre automated docking, and then observe the optical power meter, you can test the measured fiber loss parameters
HM-103 ribbon fiber coupler
