1.CATV 1550nm optical amplifier 2.Output power:13~26dBm 3.Input power:-3~+10dBm 4.W/L:1540~1560nm 5.1 or 2 or 4 output ports
Product overview
OPA-1550S series 1550nm Erbium Doped Fiber Amplifier (standard) adopts 980nm or 1480nm high linearity, optical isolation, the DFB, thermoelectric cooling DFB laser produced by JDS-U, Fujitsu, Nortel, Lucent, Fitel and other world-renowned semiconductor companies as the pumping source.
In the interior of the machine is equipped with the output optical power stability circuit and laser thermoelectric cooling device, temperature stability control circuit to ensure optimal machine performance and long-life laser stability. The microprocessor software monitor the laser’s working state, the VFD screen displays the operating parameters. Once the laser operating parameters deviate from the permissible range set by the software, micro-processing will automatically turn off laser power, red light goes on to warn, digital panel prompts cause of troubles.
Features
(1) High quality: The former-class pump commonly uses 980nm, after-class pump use 1480nm, power is legitimately optimized by software to minimize the NF of the EDFA, could be comparable with the so-called low-power optical amplifier. It can make the system to obtain superior CNR.
(2) Reliability: The 19 "1U standard rack, built-in high-performance switching power supply, it can work at 85~265Vac City Network Voltage, As well as an optional DC48V power supply (reservations required); Chassis cooling automatic temperature control. Mechanical cooler (heat sink) on one side of the chassis helps to make heat dispersion thus to protect the pump laser
(3) Intuitive: The laser is the most expensive machine components, machine equipped with microprocessor monitors the working state of the laser, and the panel LCD window displays the operating parameters.
(4) Network type: Select all piece status monitoring transponder guarantee to meet the national standard and be compatible with the SCTE HMS standard, it enable network management monitoring capabilities.
Technical specification
| Items | unit | Specification |
| Operating wavelength range | nm | 1540~1560 |
| Optical input power | dBm | -10~+10 |
| Nominal optical input power | dBm | 3 |
| Working pump quantity | 1~3 | |
| Saturated output power | dBm | 13~26 |
| Number of output ports | port | 1~8 (customer specify) |
| Noise Figure (NF) | dB | 4.0~6.8 (+0 dBm input @1550nm) |
| Optical output power stability | dB | <±0.5 |
| Polarization Sensitivity | dB | <0.2 |
| Polarization dependence gain | dB | <0.5 |
| Polarization mode dispersion | ps | <0.5 |
| Optical connector (IN/OUT) | SC/APC or FC/APC or customer specify | |
| SNMP network management interface (optional) | RJ45 | |
| Power supply | VAC | 115~265VAC or -48 VDC |
| Power consumption | W | 50 |
| Working temperature | °C | -5~65 |
| Storage temperature | °C | -40~80 |
| Operating relative humidity | % | 5~95 |
| size | ‘’ | 19×14.5×1.75 (1U,19’’) |
Product series
| Model | 1550nm Erbium Doped Fiber Amplifier (Standard) | |
| Output power @ +3dBm input | Noise Figure (dB) | |
| OPA-1550S-13 | Saturated output power≥13dBm | 4 |
| OPA-1550S-14 | Saturated output power≥14dBm | 4.1 |
| OPA-1550S-15 | Saturated output power≥15dBm | 4.2 |
| OPA-1550S-16 | Saturated output power≥16dBm | 4.3 |
| OPA-1550S-17 | Saturated output power≥17dBm | 4.5 |
| OPA-1550S-18 | Saturated output power≥18dBm | 4.8 |
| OPA-1550S-19 | Saturated output power≥19dBm | 5 |
| OPA-1550S-20 | Saturated output power≥20dBm | 5.3 |
| OPA-1550S-21 | Saturated output power≥21dBm | 5.5 |
| OPA-1550S-22 | Saturated output power≥22dBm | 5.8 |
| OPA-1550S-23 | Saturated output power≥23dBm | 6 |
| OPA-1550S-24 | Saturated output power≥24dBm | 6.3 |
| OPA-1550S-25 | Saturated output power≥25dBm | 6.3 |
| OPA-1550S-26 | Saturated output power≥26dBm | 6.3 |
CATV Erbium Doped Fiber Optical Amplifier (Standard EDFA) OPA-1550S
