OLT fiberway5000 series adopts the EMS operating system whose intelligent property is owned by PHOTON, Good market reputation
Fiberway5000 OLT series, which has high reliability, highly dense EPON access and robust switching and routing abilities, is a new generation of broadband and multiservice access OLT devices oriented towards the service-integrated network.
Fiberway5000 OLT series adopts the EMS operating system whose intelligent property is owned by PHOTON, integrates with IPv6, network security, EPON, supports data, voice and video, and provides continuous forwarding, graceful restarting and ring protection, improving the work efficiency and securing the maximum running time.
Fiberway5000 OLT series includes two models: Fiberway5010 (2 slots for console panels, 2 enhanced slots and 6 normal slots) and Fiberway5016 (2 slots for console panels, 2 enhanced slots and 12 normal slots). All Fiberway5000 OLT products support the console board and the “1+1” backup of power source. Fiberway5000 OLT series can be widely applied on the networks of the carriers, EPON Equipment in the NGB upgrade of the HFC.
Features
Abiding by IEEE802.3ah, Fiberway5000 OLT series meets relevant requirements of GEPON OLT regulated in Technical Requirements of YD/T1475-2006—EPON and China Telecom EPON Technical Requirements.Fiberway5000 OLT products are cabinet modularized devices with high density and large capacity so they are easy for expansion and upgrade. Fiberway5016 has L2/L3/L4 functions, supports 352Gbps backplane bandwidth, static routes, RIP, OSPF and so on. Fiberway5000 OLT series supports advanced functions such as QoS, bandwidth control and multicast, adding extra values to the whole network.This series of products has high reliability. The key modules of the system like the control unit and the power source can be backed up through the “1+1” mode. Meanwhile, the Hitless Protection System (HPS) secures the high reliability of Fiberway5000 OLT. After the redundancy control module is configured, the highest reliability can be reached. At the same time, the functions of Fiberway5000 OLT like VRRP, STP and LACP provide further reliability.A single EPON card of Fiberway5000 OLT supports 4 EPON ports. Fiberway5016, therefore, supports up to 56 EPON ports, a maximum optical coupling ratio of 1:64, up to 3584 ONUs and a 20km transmission distance. Fiberway5000 OLT supports various interface types including GE, TE, EPON, POS and E1.Fiberway5000 OLT series supports CTC2.0/2.1 wholly, automatically detects and works harmoniously with ONUs made by different manufacturers.Specifications
Item | Attributes | Specification | ||
Interface | Fiberway5010 | Fiberway5016 | ||
Expanded slot | Two slots for the console panels Two enhanced slots 6 normal slots | Two slots for the console panels Two enhanced slots 12 normal slots | ||
Backplane bandwidth | 256Gbps | 352Gbps | ||
Maximum number of 10-gigabit ports | 4 | 4 | ||
Maximum number of gigabit ports | 32 | 56 | ||
Maximum number of PON ports | 32 | 56 | ||
EPON attributes | Supporting IEEE 802.3ah EPON standards Supporting technical requirements of YD-T 1475-2006 access network-- EPON Supporting EPON interconnection of YD-T 1771-2008 access network | |||
Meeting China telecom EPON standards--CTC2.1 | ||||
Standard OAM and expanded OAM management | ||||
Supporting uplink/downlink encryption | ||||
Simultaneous registration of up to 64 ONUs | ||||
Upgrading single or multiple ONUs | ||||
Supporting DBA | ||||
Supporting the ONU authentication and the report of illegal ONU registration events | ||||
Supporting backbone optical-fiber protection, “1+1” hand-in-hand protection, full protection, switchover delay of less than 50ms | ||||
Software functions | Supported network standard | IEEE 802.1D IEEE 802.3 IEEE 802.3u IEEE802.3ad IEEE 802.3x IEEE 802.3z IEEE802.1Q IEEE 802.1P IEEE 802.1w IEEE 802.1x | ||
STP | 802.1D(STP), 802.1w(RSTP), 802.1s(MSTP) | |||
Routing protocol | Static route, RIPv1/2, OSPF, BGP | |||
Ipv6 | IPv6 ND, IPv6 PMTU, IPv6 FIB, IPv6 ACL, NAT-PT, IPv6 tunnel, 6PE,Ipv6 static route, RIPng, OSPFv3, BGP4+ | |||
Multicast protocols | IGMP, IGMP Snooping, IGMP Proxy, DVMRP, PIM-SM, PIM-DM, MSDP, MOSPF, MBGP | |||
QoS | Having 8 queues for each port and supporting 802.1p, ToS, port ID, DifferSev, WRR, SP, SWRR, flow shaping, VLAN-ACL-based flow classification | |||
ACL | Supporting standard ACL and extended ACL, IP ACL, and data filtration based on source/destination IP, layer-3 IP ID, layer-4 TCP/UDP ID, IP priority, ToS or time range | |||
MAC operations | Supporting port/MAC bind, and MAC filter | |||
VLAN type | Supporting GVRP, PVLAN and VLAN Stacking (QinQ) | |||
Flow control | Supporting HOL block prevention, half-duplex backpressure and full-duplex IEEE 802.3x | |||
ARP | Support | |||
DHCP | Supporting Client, Relay and Server | |||
Port aggregation | Supporting 802.3ad and load balance | |||
AAA authentication | Supporting RADIUS | |||
Port mirror | Support | |||
Broadcast Storm Control | Support | |||
Security | Supporting active/standby switchover, hot swap and VRRP | |||
Network management | Console interface | CLI, WEB | ||
Console | RS-232 | |||
Telnet | Support | |||
SNMP | v1, v2, v3 | |||
SysLog | Support | |||
RMON | Group 1, group 2, group 3 and group 9 | |||
MIB interface | Provide | |||
PON interface Attribute | Wavelength of the optical module of the PON port | Downlink 1490nm; uplink 1310nm | ||
Rate | Symmetric uplink and downlink: 1.25G | |||
Average irradiating power of the PON port | +2dbm ~ +7dbm | |||
Optical reception sensibility of the PON port | -30dBm | |||
Maximum optical coupling ratio | 1:64 | |||
Physical specification | Relative Humidity | 10%~90% no condensation | ||
Working temperature | 0°C~50°C | |||
Power source’s characteristics | AC power: 200-240VAC, 50/60 Hz DC power: -48V | |||
Power redundancy | 1+1 backup and hot swap | |||
Physical size (H*D*W) | 399.2mm×315.0mm×482.6mm | 399.2mm×315.0mm×482.6mm | ||
Power consumption | 300W | 300W | ||
GEPON OLT Equipment
