1.Auto solar cell welding and tabbing station 2.Production Capacity: 600pcs/hour 3.Electromagnetic induction
BAIXIN MACHINERY have customers in Italy,Sweden,Poland,Germany,Austria,Croatia,Spain,UK,Nigeria,Australia,Cuba,Argentina,USA,Singapore,Indonesia,India, Bangladesh,Malaysia,Philippines,Jordan,etc.
INTRODUCTION:
The BXM-CH2316B is an automatic solar cell welding machine.
It adopt high frequency induction welding technology with high efficiency ,low damage rate and good welding result.
BENEFIT:
1.Electromagnetic induction with no touch
2.Inner cycle temperature control
3.Subsection heating, lower damage rate
4.Cell shape and grid line integrity detection
5.Grid line correction
6.Solder strip straighten
7.No need to stop the machine when filling flux
8.Servo control system
9.Lower consumption
SPECIFICATION:
Production Capacity | 600pcs/hour (10MW/year) |
Comprehensive damage rate | ≤ 0.2% |
Welding manner | Electromagnetic induction with no touch. |
With a little flux on the surface of the solar cells. | |
The size of solar cell | 125X125mm 156X156mm |
Thickness of solar cell | ≥160μm |
The number of solder strip | 2 or 3 line |
Space between solar cell | 2-40mm |
Power supply | 180~230V,50~60Hz,20A |
Peak power | Max 5KW Average 3KW |
Air compression | Pressure0.5~0.8Mpa Rate of flow0.3m³/min |
Length of solar cell string | 1. 156X156mm Gap 2mm 12pcs |
2. 125X125mm Gap2mm 15pcs | |
Dimension | Stopped status 4580X1035X2037mm |
Front door opened status 4443X1572X1987mm | |
Weight | 1300KG |
solar cell Tabber & Stringer
