Jining Kanglida Medical Technology Co., Ltd. [China]

orthopedic splint 1.ISO,CE approved 2.Easy operation, safety 3.Molding fast, Waterproof 4. Factory price, free sample

                                            Orthopedic    Casting    Tape

Specifications

Medical Orthopedic Splint 1.ISO,CE approved 2.Easy operation 3.Molding fast, Waterproof 4. Factory price, free sample

1. Characteristics 

1. 20 times stronger and 5 times lighter than the traditional plaster cast

2. Harden fast :functional stength will be achieved in 20 mins

3. Good air-permeability ,Water-proof,Good X-ray radiolucence

4. Easy operating and no harm to patients

2. Storage

1. Be careful not to break the package.

2. Store the Splint(Poly) at room temperature.

3. Note: store at higher lower temperatures may affect the shelf-life and    handing properties of the product.

4. Damaged products by careless handing cannot be replaced. Please handle and store them carefully.

5. The shelf-life of the Splint(Poly) stored by the above method is about two years.

3. Operation

1. After opening a roll, soak the whole set into lukewarm water for 2030 seconds.

2. Wipe-out excess water on both sides with dry cloth

3. Attach GR-2000 splint to affected area and apply the bandage around splint to fix.

4. All the above process will take about only 5 minutes

4. Warning

1. The higher the water temperature is, the faster THE Splint(Poly) hardens.

2. The setting time becomes shorter as the water absorption time increases.

3. The Splint(Poly) can be used without immersing it in water if slow setting is needed. It may take approximately 15 minutes for the splint to harden without immersion in water.

4. The thick side of non-woven fabric should be applied to the desired area of the patient

5. Packing

medical splint and orthopedic splint