ceramic heater rod 1.manufacturer&OEM 2.energy saving,high thermal efficiency 3.good electric insulation 4.safty High Temperature Alumina Ceramic Heater Rod ; ceramic heater rod ; ceramic heater ;  alumina heater rod

1.Introduction:

HTCC is an acronym for High-temperature co-fired ceramics; HTCC ceramic heating element is made up of high melting point metal heating material such as tungsten, molybdenum or molybdenum – manganese and 92-96% alumina ceramic substrates.  The metal heating resistance slurry is printed onto the tape casting ceramic green body according to the design requirement, several layers of ceramic green body are then laminated together and is fired at 1500 ~ 1600 °C high temperature,  with the aid of 4-8% sintering additive, to form the alumina ceramic heating element. This product features in corrosion-resistant, withstanding high temperature, long life cycle, energy efficient, uniform surface temperature, excellent thermal conductivity and thermal compensation rate. Alumina ceramic heating element doesn’t contain harmful substances such like: lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, etc., and is in compliance with EU RoHS and other environmental requirements.

2.Background information

With the advent of the integration of electronic components, electronic devices have posed higher demands on circuit miniaturization, high-density, multi-function, high reliability, high speed and large power. Co-fired multi-layer ceramic substrate meets all these requirements so it has been used in a wide range of applications in recent years. Co-fired multi-layer ceramic substrate can be divided into high temperature co-fired ceramic (HTCC) substrate and low temperature co-fired multi-layer ceramic (LTCC) substrate. Compared to LTCC, high temperature co-fired ceramics (HTCC) has higher mechanical strength, higher wiring density, better chemical stability, higher thermal dissipation coefficient and lower cost and is widely used in the heating and packing applications requiring higher thermal stability performance, less high temperature volatile gases and better sealing. High temperature co-fired ceramic heating element is a good alternate of alloy wire and PTC ceramic heating element and component.

3.Features

1)Energy saving, high thermal efficiency

2)Surface is not charged, good electric insulation, withstand 4500V/1s, leakage current<0.5mA

3)Linear resistance-temperature, easy to control temperature by controlling the electric resistance

4)No power decay for a long period

5)Rapid heating, a 500W ceramic heating element can reach above 600 °C in 20 seconds; its components can reach above 200 °C in 10 seconds

6)No open flame, safety

7)Uniform surface heating

8)High power density: ≥ 50 W/cm2

9)Environmental Protection: no lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, more harmful substances such as polybrominated diphenyl ethers, in full compliance with EU environmental requirements.

4.Application

1)Heat gun

2)Hair salon appliance (hair straighteners, curlers)

3)Warm air conditioning

4)Instantaneous water heater

5)Multi-functional microwave, oven, drying

6)Clothes dryer

7)Hand dryer

8)Kettle, coffee maker

5.Technical parameters

5.1

Apperance

1)Smooth surface

2)Neat edge

3)Silver electrode

4)White ceramic body

5)Our "efficient Tape Casting ceramic substrates" technology prepares ultra-thin, ultra-smooth ceramic green body which ensures the smooth surface of the ceramic body. Precision hot press lamination ensures the neat edge. Electrode points are nickel plated and spot welded leads after firing, so the electrodes appear silver.

5.2

Dimension tolerance:

1)Length direction: ± 1.2mm

2)Width direction: ± 0.5mm

3)Thickness direction: ± 0.1.

4)After repeated firing experiments, our R & D personnel has collected the green body shrinkage data, and summed up the appropriate rate of contraction based on experimental results. Through careful control of the casting, punching and lamination process, we minimize the size differences between the green body and the firing product.

5.3

Voltage range: DC / AC 5-220V

Depending on the resistance value, alumina ceramic heating element can be used in a wide range of voltage from 5V DC to 220V AC.

 5.4

Power density

By optimizing the production formula, ceramic heating element generates the greatest possible power density, from 60W / cm2 in startup stage, to 25W / cm2 in normal use.

 5.5

Leakage current <5mA

Rated leakage current <5mA. When applying 1800V/3750V high voltage, leakage current is less than 0.5mA.

5.6Thermal ShockThe product can withstand thermal shock without cracking when it is heated to 150 ± 10 °C and is placed in water at 20 °C. 5.7 Electric insulation

When applying 4500V for 1 second, leak current <0.5mA

6, Material properties

Properties	Test condition	Unit	Value or performance
Color, appearance			White, dense
Substrate material			96% alumina ceramics
Density		g/cm3	>3.7
Warpage		mm	<0.2mm
Leads tensile strength		kg	Axial direction ≥5Across direction≥3
Bending strength		MPa	>300
Thermal conductivity	20°C	W/(m.K)	≥20
Electric insulation strength	25±1°C,110V:1800V/10seconds,220V:4500V/10 seconds		Leakage current <0.5mA
Insulation resistance	DC500V	MΩ	>100
Electric resistance	25±1°C	Ω	0.4-1000 (or customer made)
Cycle time test	Under rated voltage and general temperature condition (≤ 280 ° C), power on for 60min and then power off for 60min repeatedly		1000 times, no damage
Power-on test	At rated voltage, power on for 20 seconds in the air, the surface temperature of 600 °C -750 °C		No damage
High-temperature durability test	At the highest temperature, generally 500-700 ° C, continuously power on		More than 24 hours

We accept Customer made alumina ceramic heating element.

We have our own factory.Our own factory: located in Zhangzhou, Fujian.

 

 

 

 

 

 

 

 

  

High Temperature Alumina Ceramic Heater Rod