York 931, 422, 431, 326, 421, 333, 371 mist eliminator Demister Used in case of low-pressure loss is required, or when blocking-up may occur Style and Their Feature Style Density kg/m3 FreeVolume % SurfaceArea m2/m3 Products of Other Companies Metex York Becoil Knitmesh Vico-Tex Uop Koch Acs H 80 99.0 158 Hi-Thruput 931 954 4536 160 B 511 7CA L 120 98.5 210 422 N 144 98.2 280 Nu-Stanadrd 431 9030 280 A 911 4CA SN 128 98.4 460 326 415 706 SL 193 97.5 375 Xtra-Dense 421 890 9033 380 C 1211 4BA SM 300 96.2 575 SH 390 95.0 750 T 220 97.2 905 R 432 94.5 1780 Multi-Strand 333 800 W 220 97.2 428 Wound GS 160 96.7 5000 371 STYLE FEATURES H-Style Can permit highest vapour velocities for mist load than any other styles. Used in case of low-pressure loss is required, or when blocking-up may occur, or when the removal of larger mist or high efficiency is not required. Usually used 150 m/m thickness. As for the efficiency equivalent to SL-Style, used in 200 m/m thickness N-Style For all round use. It has 95-99% efficiency against 8μ mist at 1-5 m/sec velocity. SL-Style Used when high efficiency is required. Though pressure loss is increased slightly, it is considered to have 95-98% efficiency against 3μ mist at 1-6 m/sec velocity. This S-Style is especially needed when approximately 90% efficiency at 1 m/sec velocity is required. T-Style Used when removing of approximately 2μ-3μ mist. Especially when the entrainment is 1.0 gr/m³ or less; 200 m/m to 300 m/m thickness is used. R-Style Used for removing of every minute mist of approximately 1μ. The most efficient type for its thickness.
