Operate and maintain easily
Introduction:
The unpowered deliquescent air dryer operates by utilizing a desiccant to absorb the moisture in the compressed air without the need for a powered mechanism, eliminating the need for complex
maintenance and enabling any operator to install and run the air dryer.The only maintenance required is the refilling of the desiccant approximately 2~3times per year by
checking the level via the sight glasses on both sides of the vessel. In addition, the deliquescent air
dryer solves the problem of secondary condensation occurring in units where the process takes place more than 100 meters from the machine room and external moisture infiltrates into the piping due to the molecular pressure difference within and without the piping (pinhole effect). Maintenance costs are reduced by the small number of moving parts, and outdoor installation is possible even in temperatures lower than -20°C.
Inlet temperature of less than 38°C recommended and Pressure 7kg/cm2, 6000 hours operation criteria, when using more than performance and desiccant consumption standard specifications
may be different (Based on average Inlet temperature 32°C)
Indoor and outdoor can be installed.
Desiccant consumption is based on an operating time of 6000 hours per year.
Design pressure 9.9kg/cm2, Maximum operating pressure 9.0kg/cm2 (If pressure of 10kg/cm2 or higher is required, customized units are available)
BD200 and higher requires twin tower, BD400 requires customized unit.
These specifications may be modified to improve quality.
Deliquescent Air Dryer
