Hydraulic rock core mining drilling machine (KQG120Y-II) 1)Drill dia:140mm 2)Drill Depth40m 3)pressure:2.4Mpa+Low cost
Hydraulic rock core mining drilling machine (KQG120Y-II)
hydraulicKQG120A high air-pressure down-the-hole drill uses a diesel engine (or electric motor) to drive the hydraulic oil pump to provide power for the moving, turning, propelling and lifting of the hydraulic motor of the drill as well as swing angle positioning. When it works, only the down-the-hole hammer consumes the compressed air. Compared to full air-operated drills, it can save up to 40-50% energy (fuel oil or electric energy). It is mainly used in drilling work, for example, surface mining, hydroelectric engineering, road construction and rock excavation.Specification table for KQG120Y high air-pressure down-the-hole drill
Performance parameters:Borehole diameter: 90-140mmBorehole depth: 40mWorking air pressure: 1.05-2.4MpaAir consumption: 11.3-14m3/minMaximum horizontal rock drilling height: 3.1mMaximum angle of inclination of sliding guide: 180°Maximum swing angle of sliding guide: 35° right and 50° leftMaximum horizontal swing angle of drill arm: 45° both left and rightPitch angle of drill arm: 48° horizontally upright
19° horizontally downwardLifting force: 15,000NTurn-around machine speed: 0-80r/minMoving speed: 0-2.5km/hDrive braking, wet dual discs, hydraulic oil release and spring applicationClimbing ability: 26°Overall dimension (length×width×height): 6,000mm×2,260mm×2,220mmWeight: 5.5tDust removal: wet (dry dust removal is also optional)
Hydraulic rock core mining drilling machine (KQG120Y-II)
