RTV-1, Acetoxy-curing Door & window frame sealing Fast curing, short SFT Good adhesion on many substance Non-yellowing
Characteristics
HX-1300 is one-component, acetic-curing silicone sealant for general purpose sealing in do-it-yourself application..
HX-1300 cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.
Special characteristics
¨ Non-sag
¨ Ready gunnability at low (+5°C) and high (+40°C) temperatures.
¨ Flexible at low (-40°C) and high temperatures (+100°C)
¨ Rapid cross-linking: quickly becomes tack-free
¨ Flexible at low(-40°C )and high temperatures(+150°C)
¨ Good adhesive to glass, vitrified surfaces, ceramic tiles, many plastics and most paints.
¨ Good tooling characteristics
Color:
Transparent, Black, White, Grey,
other colors are available according customer's require
Application
DIY application (car, boat, caravan, house)
Adhesion
HX-1300 exhibits excellent primerless adhesion to most non-porous siliceous material, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker; impregnated, varnished or painted wood and many plastics.
Users must carry out their own tests due to the great variety of substances.
The adhesion can be improved in many cases by pretreatment of the substrates with a primer.
Restrictions on use
HX-1300 is not recommended for use on substrates, such as marble, concrete, fibrous cement and mortar, as the product releases acetic acid during curing.
HX-1300 may be discolored in contact with some organic elastomers, e.g. EPDM, APTK and neoprene.
HX-1300 should not be used in contact with metals such as lead, cooper, brass or zinc due to corrosion.
HX-1300 is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining.
HX-1300 is not recommended for sealing of aquaria.
HX-1300 is not recommended for structural glazing bonding.
The curing time can be extended at lower temperature, low humidity or by low volume of air change.
Package:
Content | Package size | Boxes size | Boxes/pallet | |
Cartridge | 300ml | 24 | 305(L)*205(W)*240(H)mm | 72 |
Shelf Life
At least 12 months
Storage
Please keep the product stored in a cool (below 25°C), dry place in moisture-tight original container.
The best before date of each batch is shown on the package.
Product data
Property | Unit | Value |
Density at 23C | [g/cm3] | 0.98 |
Consistency | Non-sag | |
Extrusion rate at 23C | [ml/min] | 450 |
Skin-forming time at 23C/50% r.h. | [min] | 15 |
Hardness, Shore A | SHA | 20 |
Tensile strength | [N/mm2] | 0.4 |
Ultimate elongation | [%] | 450 |
Modulus at 100% elongation | [N/mm2] | 0.3 |
(These figures are intended as a guide and should not be used in preparing specifications)
Fast Curing Silicone Sealan for Door & Window Frame Sealing
