ACRYLIC TAPE (M33)
Bond strength is depend on the amount of bonded surface and application pressure. - In case of acrylic foam tape, mor
FUYIN TAPE FM33 | |||
DESCRIPTION | UNIT | FM33 | TEST METHOD |
Adhesive | Acrylic | ||
Carrier | Acrylic Foam | ||
Color | Gray | ||
Thickness | mm | 0.80±50um | |
Release Liner | Red PE | ||
Standard Roll Width | mm | 840 | |
Standard Roll Length | M | 33 | |
Tensile Strength | |||
(T-block) | |||
To Aluminum | gf/cm2 | ≥6,500 | ASTMD -897 |
Room Temperature | |||
Peel Adhesion | |||
To Stainless Stell | gf/25mm | ≥3,700 | ASTMD -3330 |
Room Temperature | |||
180°Peel | |||
Holding Power | |||
To Stainless Steel | |||
80 Temperature | Hr | >24 | |
1000g Static Load | |||
Dynamic Shear Strength | |||
To Stainless Steel | ≥3,700 | ASTMD -1002 | |
Room Temperature after20 minutes | gf/cm2 | ||
To Stainless Steel | ≥6,500 | ||
Room Temperature after 24hours | |||
Temperature Tolerance | |||
Short term | 160 | ||
4 hours conditioning at indicated | |||
temperature with 100g static load | |||
long term | |||
Maximum temperature where tape | |||
supports 250g in static shear for | 100 | ||
10000 minutes | |||
THE VALUES IN THE ABOVE TABLE SHOUBLE NOT BE USED FOR SPECIFICATION PURPOSE |
ACRYLIC TAPE (M33)