RGB remote controller 1. DC12V/24V 216/432W 2.Touching (Wireless) 3.Can connect 50M RGB led strip 4.CE & ROHS
led touch controller(NEW TYPE):
I.Presentation Mode
1,Gradual Change Mode
-under powered condition ,press No.2button,RGB controller will be changed into gradual change mode .Touch A/B button ,you can control the speed of gradual change ,A to speed, B to slowdown .Changing them into normal mode need close the RGB controller and restar it.2,Hopping mode-Under gradual change mode condition ,touch No.2button, the RGB controller will be changed to hopping mode ,Touch A/B button can control the speed of it ,to speed ,B to slowdown .Changing them to normal mode need restar the RGB controller .
Pay attention:The change of the above two presentation mode need 4 seconds.
II.Basic parameter
1,Frequency 433MHZ2,Support DC12/24Vinput , max power 216W
III.Operating Instructions(remote control is touching button)
1,Touch ON/OFF button ,you can switch on/ off the RGB strip.2,Slide the color ring ,RGB strip will show the same color.3,Increasing color button can adjust the current color to the most vivid ,decreasing color button is contrary .until pure white.4,You can adjust the brightness by dimming function ,to brighten and dim the light.5,Gradual change model: touch on button again under monochrome mode condition ,RGB strip will be changed into gradual change mode .increasing color button will speed up the color change, decreasing color button will slowdown.6,Hopping mode: under gradual change mode condition. touch on button .the RGB strip will be changed into hopping mode. Increasing color button will speed up the hopping decreasing color button will slowdown.7,Under gradual change or hopping mode, Touch on switch will change one to the other. Close the RGB strip and restart It if you want to enter monochrome mode.
IV,Attentions
1,Match the color of output wiring when connecting.2,When the color doesn’t match ,for example ,it displays blue when touch green, or displays green when touching blue ,please check whether the wiring is correct ,in this case ,exchange blue and green.
V.Connecting diagram
2012 hot selling RGB remote controller Wireless Touching DC12V/24V
