Detailed Product Description
Detailed Product Description
Product Brief Introduction
LTM-G Series Single Phase socket type two wire and three wire compact
watt meter
The single-phase plug type electrical energy table uses the newest craft
manufacture, has the volume to be smaller, the weight is lighter, the
service life is longer and so on the characteristics, this instrument
quantity is accurate, the performance is reliable, conforms to ANSIC12.10
and the IEC62053-21,IEC 62052-11 standing operating procedure 1.0 level of
electrical energy measurement request, uses the LCD demonstration electric
quantity (also to be possible to select register demonstration electric
quantity).The watch cover uses being flame-resistant to gather the carbon
manufacture, it has the dual insulations, IP53 dustproof, the
waterproofing, shows the base to make by the high grade bakelite material.
The communication conforms to the IEC1107 communication agreement, the
electrical energy table has the photoelectric communication port, the user
may carry on the electric instrument parameter through this photoelectric
communication mouth the establishment or the downloading data recording, in
sets at RS-485 or the RS232 port, only can use the corresponding on
position machine system software to carry on the read-write operation, this
table may the record reverse electrical energy (be possible folk remedy to
measurement electrical energy).
Product Features
* Single and Multi-rate options
* Optical IEC 1107 Flag Port (optional)
* Active Energy and Maximum Demand (optional) measurement
* Reverse Energy Register (separately record or add to forward register as
required)
* Fraud Protection
* Compact size and weight .
*Display remains operative in the event of supply failure (optional)
1. Product Highlights
This meter can be supplied with a large digit LCD or a Cyclometer
Register. The use of innovative metering technology provides high
security and ensures the meter maintains its accuracy over its full
operating range.
2. Meter Case
Meter cover is made of self-extinguishing recyclable polycarbonate.It has
double insulation and has IP53 protection against dust and water
penetration. The meter base is made of high quality bakelite.
3. LED Indicator
A high light LED is mounted on the front of the meter, pulsing at a rate
proportional to the measured load. The pulse is identified on the meter
cover. The pulse can be used for checking calibration of the meter.
4. Communication
The meter has an optical interface based upon IEC 1107 protocol. The user
can program meter parameters or download recording data through this optic
port. Optional built-in RS-485 or RS-232 port for accessing to AMR system.
5. Reverse Energy
Reverse Energy is detected if export energy greater than the meters
starting threshold is measured. If reverse energy is detected, the alarm
flag will display on the LCD. The meter will register the reverse
enenergy. (Unidirectional meter measuring energy).
Technical Specifications
1. Applied StandardsANSI C12.10, IEC 62053
2. Typical Accuracy 0.5; 1.0
3. Meter Form1S, 2S, 12S
4. Meter ClassClass 100, Class 200
5. Starting CurrentLess than 5 W
6. Nominal Voltage (Un)120, 120/240, 120/208 V
7. Voltage Range0.87Un to 1.2Un
8. Frequency50/60 Hz
9. Operating Temperature Range-25'C to +60'C
10. Storing Temperature Range-30'C to +70'C
11. Current Circuit burden<0.3 VA
12. Voltage Circuit burden<0.8 W / 3.5 VA
13. Dielectric Strength4 kV, 50 Hz, 1 min.
14. Impulse Voltage6 kV, 1.2 / 50 μs
15. Short-circuit Current30 I max
16. Burst Test 4 kV 801+4)
