Welcome to ECBAY
DD284 Single Phase Watt-Hour Meter
DD284 Single Phase Watt-Hour Meter

Detailed Product Description


 

Introduction of Single Phase Watt-Hour Meter
1. Case
1.1 Base:
Steel sheet
weather proof steel sheet
1.2 Meter cover:
Meter cover is made of ABS material, flame resistant, in black colour, with glass window.
Meter cover can also be made of transparent glass, weather proof.
1.3 Terminal block
The terminal block is made of phenolic resin, flame resistant, in black colour. Voltage link can be inside the meter base or outside the meter base.
Terminals are made of brass having two screws for tightening the external cables.
1.4 Terminal block cover
Short steel cover-rubber underside the cover assures insulation between the cover and the terminal block
Short ABS cover-non-flammability of ABS cover conforms to requirements of IEC60521
Extended steel cover-rubber underside the cover ensures insulation between the cover and the terminal block. Access is available at each side of the terminal cover for external cables.
2. Driving element
Current electromagnet
The overload compensating set mounted on the laminated silicon-steel core assures the excellent load curve performance.
Voltage electromagnet
The design of voltage electromagnet permits to withstand the impulse voltage of 6kV.
3. Braking element
Braking element is made of monopolar magnet. Its adjustment range conforms to requirements of IEC60521
4. Frame
The meter frame is made of aluminum alloy with sufficient strength. It is painted for effective protection against corrosion.

Single Phase Watt-Hour Meter

5. Moving element
Worm gear on the rotor shaft is made of brass or optionally plastic one.
Anti-creeping pin is fitted to the rotor shaft to prevent running with no-load.
Anti-reverse device can be mounted in the meter if it is required.
Upper bearing
With excellent friction resistant property, the upper bearing pin is of polished stainless steel to guide the rotating of the disc.
Lower bearing(optional)
Double jewel bearing
Magnetic bearing with metal enclosure
Magnetic bearing with transparent enclosure-the bearing enclosure is made of transparent polycarbonate.
6. Register
The register is of cyclometer type, with frame made of aluminum alloy. Digit drums are made of polycarbonate, UV radiation resistant. The register is fixed on the meter frame by two screws. It is adjustable to assure good mesh of worm with the rotor shaft.
Unidirectional register is available.
7. Name plate
Printing ink used for name plate is UV radiation resistant one.
8. Sealing
Meter cover and terminal cover can be sealed separately. Seal and sealing wire can be made according to requirements of customers.
Technical Parameters of Single Phase Watt-Hour Meter:

1

Basic current (lb) A

3 5 10 15 5 10 20 30

2

Maximum current(lmax) A

9 15 30 45 20 40 80 100

3

Overload capacity

300% 400%

4

Reference voltage Un

110V, 120V, 220V, 230V, 240V

5

Reference frequency fn

50Hz,60Hz

6

Power loss in voltage circuit

50Hz:≤1.3W/6VA 60Hz:≤1.1W/5.5VA

7

Power loss in current circuit

≤0.6VA

8

Running with no-load

0.8~1.1Un

9

Starting current

0.5%lb

10

AC voltage test 50Hz,1mm

2kV

11

Impulse voltage test 1.2/50µs

6kV

12

Rotor speed At lb

22r/min

13

Basic torque at lb

4×10-4N·m

14

Weight of disc

21g

15

Weoght of meter

1.6kg

16

Accuracy

Class2

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.