Semiconductor cooler No need refrigerant Low noise Large quantity make low price Sample order are available
Application:
Refrigerate drying is a process that satisfies pneumatic requirement in most cases with a balance between the dryness it can accomplish and its cost-effectiveness. This dry filter is designed for indoor use featuring low inlet temperature. Its standard working condition are: working surrounding temperature 25°C, compressed air inlet temperature 30°C, capable of getting a pressure dew point lower than 10°C. Relevant rectification should be made to the processing air flow according to the specific conditions available.
It is adaptable to upgrading an old compressed air system that has no air post-processing device. It need no modification to the original equipment room and pipe network, except some installation near the air use end (the therapy room).
And if it together with our dental oil-free air compressor it is more economical to suit dental clinics and small medical institutions. Then simple coils are used for heat dissipation, and the humidity load of the incoming air is allowed through heat dissipation and separation of the air tank(Attention: Since the air tank is used for heat dissipation and separation, condensate in the air tank should be discharged every day).
Product Feature:
(1) Terminal air dry filter--Realizing refrigeration through a semiconductor cooler, it is a piece of equipment that provides purifying technologies for drying compressed air of a small flow not greater than 1m3./min at the terminal where the air is used.
(2) High efficiency--By way of freeze drying, it accomplishs quite high dryness and high cost-effective ratio as well. this is a technology that satisfies the requirments in pneumatic operation in most cases and a technology that is most widely utilized.
(3) Advanced utility model patent--The utility model patent cooler allows adequate cooling of air in a small volume and allows air-water separation to lower the humidity of the compressed air.
(4) High reliability and low cost--It needs no refrigerant and features low noise, long life and low cost of maitenance, as there is mo mechanical moving parts except the fan.
(5) Compactness--Ultra-small volume, easy installation and use, and simple operation.
Specifications:
OD- Dry Filter series
Model number: OD-3
Power: 290W
Voltage: 220v/110v, 50Hz/60Hz
Working pressure: 8bar, 116psi
Capacity: 280L/min, 10cfm,
Pressure dew point@7bar: <10°C
Inlet air temperature: <35°C
Dimension: 250*170*420CM
Weight: 7KG
refrigeration air dryer of air compressor part
