Mainly applies to long-term bedridden patients of paralysis, burn and fracture to use with in the wheel chair, or on the sofa.
Instructions for Wave-motion Air Cushions
1. Structure
This product is mainly composed of air cushion and air pump.
2. Function
Mainly applies to long-term bedridden patients of paralysis, burn and fracture to use with in the wheel chair, or on the sofa.
3. Operating Methods
(1). Connect the double inflatable tubes of the air pump. Hung up the tubes to the wheel chair or the relevant position on the seat with the pothook under the bottom of the air pump, and open the power switch at the back of the inflatable air pump. The pump is in standby. Press down the stand by switch, the air pump begins to work and the patient can use it.
(2). The pressure and the time of the Line 1 and Line 2 can be set and transferred according to the need of the patients.
(3). There is a built-in 3500MA lithium battery in the pump. After charge, the pump can continue to work for 10 hours. There is a low-pressure alarm device in the pump. When the electricity is in shortage, the built-in buzzer system will give an automatic alarm. At this time, the machine should be charged by the equipped charger.
(4). When the red lights, the charger is in the charging status, when the green lights, the charge is finished. It needs about four hours to charge every time.
4. Technical Parameters
(1). Charger power:AC110V-240V
(2). Frequency:50/60HZ
(3). Lithium battery voltage:12V
(4). Lithium battery capacity:3500MA
(5). Dimension of the cushion:430×430×80(mm)
ISO9001
ISO13485
CE
KA06 wheelchair air cushion
