PYF Series Compound Cone Crusher
This type of cone crusher is widely applied in the metallurgical, architectural, chemical, road building and silicate industrial, it is suitable for crushering varies of middle-scale and over middle-scale hard ores and rocks, it has the advantage of high crushering force, high production efficiency, large processing amount, lower cost of operation, convenient adjustment and economical operation. Because of the reasonable selection of raw material and perfect structure design, it has a long service life, with the even finished product size and reducing the cycle load, a hydraulic cleaning system is adopted in the middle-scale and large-scale crusher in order to reduce the cleaning time of machine, in addition, there are various of crusher cavities with different standard to be chose by users according to varies demands to meet client's need. This series crusher adopt lubricating grease to seal to avoid the possible deficiency of block for draining system and mixing of water and oil. The spring system serves as an overload protection device, it lets the foreign substances and iron material pass through the crusher cavity without any damage. The crusher can be divided into standard type and short head type, generally speaking, the standard type has the feature of large feeding size and coarse discharge size. The short head has the feature with steep cone and small feeding size, it is in favor of producing super -fine material, so the standard type is suitable to produce during coarse and medium crushering process, and the short head type is suitable for medium and fine crushering process.:The capacity spec in the form related with feeding size, crushering cavity type, material density, material cleaning degree and moisture content.The smallest discharge opening is mean the smallest discharge opening under condition of without leading to jump of supporting sleeve, this would be related to feeding material, and this discharge opening is changeable.The capacity is mean: The material anti-compression strength is 140Mpa~150Mpa, the moisture less than 4%, feeding evenly, the outsize and undersize fineness all less than 10% and motor load is around 85%~90% under condition of open circuit process.The height of machine including feeding stand.The meaning of 4 figures contained in the type: The first 2 figures mean the 1/100 diameter for crushering cone, the last 2 figures mean 1/10 size of feeding opening.The spec could be changed without notifying.
PYF Series Compound Cone Crusher
