Zhejiang Chenxin Machine Equipments Co., Ltd. [China]

1 same design as Nordberg 2 for secondary crushing 3 with copper and steel eccentric set 4 size adjustable 5 four strokes

1. Instrucion

Single Cylinder Hydraulic Cone Crusher (nordberg cone crusher) is in the digestion and adsorption of advanced crushing technology in the world today, on the basis of optimal design of perfectly combining the swing frequency, eccentricity and crushing cavity type. It makes the finished product material level higher. The material level which less than the tight side discharging opening is more than 80%. So it can improve the processing capacity of producing line subsequent handling, and reduce the comprehensive energy consumption.

2. Advantages

Disadvantage of traditional spring cone crusher

1. The main spindle adopts the single supporting structure, with smaller bearing crushing force, with larger eccentric angle, with worse stability. The adjusting structure of protect device and discharging port are too complicated, with too many out-hanging parts.

2. The crushing cavity type, swing speed, and eccentricity are without being optimized. It cannot realize the laminating crushing, so the processing capacity is very low, the electric consumption of per Ton is very high, the shape of finishing product is not good.3. It has to be turn off if you want to adjust the discharging port, and it cause a large drain of man power and material resources. The adjusting process is very complicated and cumbersome. 4. The machine has to be turned off for a long time to change the liner, it wastes time and energy. And the liner faying surface has to be casted with fillers.

5. The spring protect function cannot realize the quantitative control. The shaking is very strong when reset, the machine is easily been destroyed.

6. The water supply pipe and drain pipe of water sealed dust system can be easily jammed. And the water and oil are easily been mixed together.

Advantage of TS300 series single cylinder hydraulic cone crusher

1. It adopts the optimal design of perfectly combining the swing frequency, eccentricity and crushing cavity type. It makes the finished product material level higher. It reduces down the comprehensive energy consumption more than 30%.

2. The crushing cavity type is optimal designed, and perfectly combined with swing frequency and eccentricity. It ensures the laminated crushing between the materials. It improves the machine processing capacity greatly, 30%-50% higher than the traditional spring cone crusher. And the product grain shapes is very good, the most is the cube structure, the quantity of needle-flake type material is reduced down greatly.3. The main spindle adopts the double-supporting structure, can bear larger crushing force, the dynamic cone with small eccentric angle, with better stability.

4. It can change the stroke according to the material properties. You can get the different eccentricity by rotating the eccentric sleeve to be fit for different crushing request. And it makes the product curve and productivity optimal.

5. It adopts the hydraulic control system, adjust the discharging opening conveniently, you can adjust the opening on line. And it provides the overload protection. It is easy to realize the automation, the reliability and life are improved greatly.

6. The dilute oil station adopts electric refrigeration, quickly and good effect. It avoids restricts, such like slow of wind refrigeration, the shortage of water refrigeration.

7. It adopts the positive pressure dustproof system and unique seal structure design, can keep the cleanness of lubrication oil and prolong the service life of components.

3. TS300X Single Cylinder Hydraulic Cone Crusher (nordberg cone crusher) main technical parameters:

Notice: the above data processing is based is basd on the density of bard 1.6T/M3 dry granite, since the feed particle size, rock type and moisture content and other factors not the same, actual results will vary, discharge port data is obtained when the situation 25mm eccentricity, and with materials related to that discharge opening is variable. Capacity and other parameters is not greater than the material compressive strength of 250mpa, less than 4% water, feeding evenly, too much size and too small particle size not greater than 10%, electricity motivation load at the rated load reached 80%-90% of the data subject to change without notice.

4. TS300X schematic structure

5. Cone crusher eccentric set of components

6. Spindle dynamic cone component

7. Transmission shaft component

8. dilute oil station

Single Cylinder Hydraulic Cone Crusher (nordberg cone crusher)