Welcome to ECBAY
Submerged arc welding wire EL12
Submerged arc welding wire EL12

Product:SAW Welding Wire Application:welding of general carbon steel structures

1)specification: EL12

2) Sizes: 2.0-5.0mm

3) Material applications

Carbon steels (structural and vessel construction)Low alloy steelsStainless steelsNickel-based alloysSurfacing applications (wear-facing, build-up, and corrosion resistant overlay of steels)


High operating factors in mechanized applications.Deep weld penetration.Sound welds are readily made (with good process design and control).Minimal welding fume or arc light is emitted.Practically no edge preparation is necessary.The process is suitable for both indoor and outdoor works.Distortion is much less.Welds produced are sound, uniform, ductile, corrosion resistant and have good impact value.Single pass welds can be made in thick plates with normal equipment.The arc is always covered under a blanket of flux, thus there is no chance of spatter of weld.


      25kgs in coil per carton, 1ton in one pallet

      250kg with drum packing 

Submerged arc welding wire EL12

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.