High tensile strength ,small elongation Heat resistance,fatigue resistance and corrosion resistance Good adhesion
Solid woven fabric dipped in PVC paste. b) PVC / PVG covers combined by vulcanisation
PVC Solid Woven Conveyor Belt :• It is ideal for application in dry condition at a slope angle of 16° maximum.• NON PRESSED PVC BELT has maximum cover thickness of 0.8 mm.• PRESSED PVC TYPE can have cover thickness upto 4mm, giving better properties to the belt, such as impact resistance & longer service life.PVG Solid Woven Belt with Nitrile Rubber cover :• Is suitable for carrying materials mix with water at an angle of upto 20°.• The cover, mainly composed of rubber, provides excellent troughability, service life, better resistance to wetness, slip, impact & wear & tear.
Type | Flame resistant | |
Longitudinal full thickness tensile strength (KN/m) | 800~1500 | |
Longitudinal elongation | <=2% | |
Burner flame test | With cover: average<=3s, individual<=10sWithout cover: average<=5s, individual<=15s | |
Surface resistant | <=3*108Ω | |
Rubber thickness (mm) | top | 1.5~8 |
bottom | 0~4.5 | |
Rubber abrasion | <=0.5cm3/1.61KM | |
Width (mm) | 400~1600 | |
Length/Roll (m) | <=200 | |
Standard | GB10822 | |
PVC/PVG Solid Woven Conveyor Belt
