Aggressive leading edge design Variety of approved systems two material for choice customers design OEM
Heat Treat Grader Blades 3G8016
| Part Number | BladePosition | BladeType | BladeDimensions | TotalHoles | BoltsDia | WeightKg |
| 1/2 x 6 Curved 5/8" Plow Bolts | ||||||
| 3G8016 | C | 1/2 x 6 x 4' | 9 | 5/8 | 15 | |
| 9J3862 | C | 1/2 x 6 x 5' | 11 | 5/8 | 19 | |
| 2C3119 | C | 1/2 x 6 x 6' | 8 | 5/8 | 23 | |
| 8D2786 | C | 1/2 x 6 x 6' | 13 | 5/8 | 23 | |
| 8D2787 | C | 1/2 x 6 x 7' | 15 | 5/8 | 27 | |
| 8J7782 | C | 1/2 x 6 x 8' | 17 | 5/8 | 31 | |
We provide full line blades.
U-Blade, is designed with large “Wings” to carry large loads over long distances more efficiently.
S-Blade, is good general purpose blade for most dozing applications.
C-Blade, is a relatively narrow blade designed primarily for pushing scrapers.
A- Blade, is an economical light to medium duty blade designed for use on D8 and samller Machines where the ability to side-cast is desired.
Cutting edge
EWL, is extended wear
GD, is General duty
Utility is flat plate design
Hot Cupped,
For Cutting edge and end bit, At present we have 2 type material, basiclly we B1 is normal carbon steel without heat treatment, it work in normal condition, such as soil and clay. For tough condition we recommend to apply B2, which is with B added, strong and elastic.
Material | C | Mn | Si | Cr | S | p | B | Hardness | V-Norch -20 Centidegree | Elongation | Yeild |
B2(30MnB) | 0.26-0.30 | 1.10-1.40 | 0.15-0.30 | 0.30-0.50 | 0.03max | 0.03max | 0.0005-0.003 | 440-520HB | akv>=51J | >=11% | 1440N/mm2 |
B1 (80# steel) | 0.80-0.85 | 0.55-0.80 | 0.15-0.35 | 0.30max | 0.03max | 0.03max |
| 280-320HB | akv>=6J | >=12% | 600Re-N/mm2 |
Heat Treat Grader Blades 3G8016
