top quality best price best service
IDE to SATA Adapter / IDE hard drive to SATA
Installation instructions:1. Before you should first turn off the power to the host computer;2. Open the computer chassis, the adapter plate IDE Block into the IDE devices (IDE interface hard disk, CD-ROM, etc.); master-slave IDE device jumper set the main device (Master);3. With the large end of the power cord is connected to the chassis, power supply spare power cord, the small one end of the adapter board (white transposon, attention to the direction can not be reversed);4. Connect one end of the line with the data to the computer motherboard SATA seat, one end connected to the adapter plate SATA seat;5. Connected computer boot into BIOS device detection, the host computer should be able to correctly identify the connected IDE device.Interface Description:SATA1: SATA motherboard connection - IDE device (ie IDE hard disk or CD-ROM drive using SATA interface on the motherboard, connect the SATA cable to SATA1 interface, IDE port converter plug in the hard disk IDE front please IDE device jumper is set to MASTER)SATA2: IDE motherboard --- SATA device (ie SATA hard drive with the IDE on the motherboard, connect the SATA data cable to the SATA2 converter IDE plug on the motherboard IDE. Refers SATA to IDE interface riser card, also available to the two-way on the riser card operation with
IDE to SATA Adapter / IDE hard drive to SATA
