FTTH 4 cores Drop Cable with FRP strength member 0.6mm, 0.9mm tight buffer or loose buffer fiber; Aramid yarn strength member FTTH 4 cores Drop Cable with FRP strength member Specifications
soft and flexible; easy to lay and splice; 4-fiber ribbon;
Used as access building cable;
Used in indoor cabling, especially used for FTTH.
1,Good mechanical and environmental characteristics;
2,Flame retardant characteristics meet the requirements of relevant standards;
3,The mechanical characteristics of jacket meet the requirements of relevant standards;
4,Soft, flexible, easy to lay and splice, and with big capacity data transmission;
5,Meet various requirements of market and clients.
Min. Bend Radius
Range of Temperature
80 / 200
500 / 1000
1000 / 2200
Note: 1. All the values in the table, which are for reference only, are subject to change without notice;
2. The cable core use the colored coating fiber of 250μm;
3. The tensile and crush of the cable are accordance with the values in the table when the strength member of FRP and Steel are used;
4. The minimum bend radius (static) is 15mm when G657 fiber is used.
1,Fiber Type: G652, G655 or G657 single-mode fiber, A1a or A1b multi-mode fiber, or other types of fiber;
2, Jacket Material: Enviromental flame retardant polyvinylchloride (PVC), enviromental low smoke zero halogen flame retardant polyolefin (LSZH), enviromental halogen flame retardant polyolefin (ZRPO), or other contracted material;
3,Jacket Color: (Including color of fiber) meets the requirements of relevant standards, or other contracted color;
4,Cable Dimension: The nominal cable dimension, or other contracted dimension;
5, Delivery Length: 1km or 2km, or other contracted length;
6,Other Requirements: Other contracted special requests.
FTTH 4 cores Drop Cable with FRP strength member