1.Loose tube design 2.Self-supporting 3.Track-resistant jacket available 4.Innovative waterblocking cable core
100m span double jacket ADSS optic fiber cable 2 core optical fiber cable adss |
Description
ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
Crossing section
u Can be installed without shutting off the power
u Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
u Large span lengths
u Good performance of tensile strength and temperature
u The design life span is 30 years
u Package : 2~4km/ wooden drum
Cable Parameter
Span : 100m | under 110kv | 2~30 core |
structural parameter | Central strength components : FRP | Diameter : 1.5mm |
Loose tube (jelly filled ) | Outer diameter :1.8mm | |
Inner sheath PE | Thickness : 0.9mm | |
Outer sheath PE | Thickness :1.8mm | |
Technical parameter | Outer diameter of Cable | 11mm |
cable cross-sectional area | 95.03 mm2 | |
Fiber model | G.652 | |
Weight of cable | 98kg/km | |
Rated tensile strength (RTS) | 10 kn | |
Minmum allowed tension (MAT) | 4kn | |
EDS | 3.2kn | |
Young's modulus | 7.8 kn/mm2 | |
Coefficient of thermal expansion | 1.8 10-6/°C | |
Cruss resistance | Long term :1100 n/100mm | |
Short term:2200 n/100mm | ||
Permission bent radius | Long term (when running) 220 mm | |
Short term (when laying) 360 mm | ||
Operating temperature | When laying -15~+60 °C | |
When transporting or running :-40~+70 °C | ||
Fiber excess length | 0.5-0.7% | |
Outer sheath | PE | |
Ice load | 5mm |
Applications
u Outdoor aerial applications
u Low voltage transmission system(≤12 kV)
u Railway & Telecommunication pole route
u Subscriber & Local Area Network
u Voice, data, video & imaging system
Picture
Supply ADSS 2~30 core 100m span double jacket fiber optic cable ADSS/ 2 core optical fiber cable adss
