1,Accurate test result 2,Good stability 3,Result stable for 60's 4,Two years shelf life 5,Sensitivity down to 1mmol/l

URS-3

Test Item: Glucose, pH, Protein

Instruction:

Dip the test patch of a fresh strip into urine sample, or pass strip through urine stream 1 to 2 seconds only.Blot excess on a clean paper towel or tissue.Results may be compared between 1 minute od exposure to urine(colour changes occuring after 1 minute are of no diagnostic value)

Notes:

1, Do not touch test areas of reagent strips.

2, Do not use after expiry date.

3, Do not remove desiccant(s).

4, Do not remove strip from the bottle until immediately before it is to be used for testing.

5, Replace cap immediately and tightly after removing reagent strip.

6, Store at temperature between 2°C-30°C.

7, Store only in original bottle.

8, The sample should not be more than 4 hours old at the time of testing.

9, Collect fresh urine in a clean dry container.

Urine presevatives may affect test results. Preservatives will not prevent the deterioration of ketones, bilirubin or Urobilinogen. Bacterial growth from contaminating organisms may affect glucose, ph and blood test results.

VISUAL READING TECHNIQUE:

  

1, Immerse all reagent areas in specimen and remove strip immediately.

2, Run edge of strip against the rim of the container to remove excess urine.

3, Compare test areas closely with colour chart on bottle label or bench reader. Record the results.

LIMITATIONS OF PROCEDURES:

As with all lab tests, definitive diagnostic or therapeutic decisions should not be made or based on any single result or method.

Protection against ambient moisture, light and heat is essential to guard against altered reagent reactivity. Deterioration may result in discolourations or darkening of the reagent areas. If this is evident or if test results are questionable or inconsistent with expected results, confirm that strips are within the expiry dates and compare with standard urine.

Urine test strip by visual URS-3