1.High Pressure Pre-washing System 2.Computer Control System 3.Train Diagnosis System 4.perfect system protecting function
1.General summarize:
Automatic Train Washing System adopts to clean the dust,oil stain and other besmirch of the train. By using the water, cleaning agent and the brush to wash two lateral of the railroad train, include the car door with the pane. The Automatic Train Washing System is constituted by washing system, electricity control system, water supply system, compressed air supply systems. It adopts the train self-draught. The train passes the warehouse to wash and brush with the speed of 2-4 km/ h. Automatically proceeds railroad train two lateral washing. Wash the bodywork surface to have no the dust, mud with the other attachment. Wash the empress's water to pass by to handle to behind circularly use.
2.functions:
1) This Train Washing System can auto wash the lateral extern surface.
2) This Train Washing System provides to automatically clean the train, meanwhile, manual cleaning is also possible.
3) Each working section can work manually and move from point to point.
4) This system provides to display the washing state of each working section, any failures and relevant parameter.
5) This system has the perfect system protecting function. It also provides to give alarm both automatically and manually in the event of a failure.
6) This system provides the function: reuse the circulating water.
7 ) This system provides the record function: the train’s number.
3.specification :
Model | FD-L03 | Work Voltage (three phase) | 380V+10% 50HZ |
Washing Way | Driving-in | Control Voltage (single Phase) | 210V +10% 50HZ |
Dimension | L 4300 x W 500 (cm) | Total Power | 75 Kw |
Land Area | L 6000 x W 600 (cm) | Current | above 24A |
Washing Capacity: | 30 trains/ day | Noise | Less than 70 decibel |
Train Washing Speed | 3-5 km/h | Work Humidity: | Less then 100% |
Weight | 30 T | Work Temperature: | 0-50 degree |
Packing | 2*40 feet | Work Circumstance | Out Air |
Water Supply | Water Pressure: | 0.1 Mpa | |
Flow Rate | 60ms/h | ||
Waxes water contrast gradient | 1:150(Water dilution) 20Kg/barrel/2600 car | ||
4. Main Equipment Character
1). Main Frame Structure:
The whole frame structure adopts antirust treatment and surface spray coating treatment, and high precision jointing to extend the lifetime of whole system.
2). Train Diagnosis System:
This Train Diagnosis System mainly diagnosis the train entrance and the send the signal to PLC to control the whole train washing plant automatically. Far infrared scanning system provide accurate computer signal for PLC. It has a IP56 class of waterproof.
3). High Pressure Pre-washing System:
This system adopts stainless steel standing Multistage Centrifugal Pumps, keeping high clean affection for train.
4). Detergent Spraying System:
This system is consisted of nozzle, stainless steel pipe, pump, and container and so on.
5)Wax Spraying System:
This system mainly spray gloss wax for train before air drying system to increase the gloss and air drying effect.
6. Air Drying System:
It adopts independent work principle and adopts four sets of Fan Motor
7). Computer Control System:
Autobase electric control system adopts programmable controller of Germany Sienmens and Low-pressure protection device of French Schneide.
8). Pneumatic Control System:
Pneumatic control system is composed by pressure gauge, air pressure valve, pressure adjusting valve and oil and water separator, cylinder, etc. it mainly control vertical brush and roof brush.
Train washing machine,car washer
