1.many pieces of steel pipe can be cleaned at ONE time 2.pass CE&ISO 3.work as program set
shot blasting cleaning equipment for steel pipe out wall
Purpose:
The machine is mainly applicable to shot blasting cleaning machine, specially used for steel pipes. It can impose shot blasting on the original surface of cylinder to remove the PVC,epoxy coating ,rust layer and oxide skin, in order to get a uniform metallic luster surface with certain smooth finish, so as to remove stress and improve surface coating quality and corrosion-resistant of the cylinder .
The main characteristics of the machine as follows:
1. The shot blasting machine adopts the down-up shot blasting mode. As steel pipes are of different diameters, their bottoms are at roughly the same height when conveyed on rollers. The shot blasting machine ejects shots in a down-up manner, and the distances between shots and the surface of steel pipes are basically the same, namely, the cleaning efficiency is uniformity.
2. Work pieces continuously pass through the entrance and exit of the shot blasting machine. Because of large difference in the cleaning diameters of steel pipes, and in order to prevent shots from flying outside, the machine uses multi-layer replaceable seal plates, so as to realize the complete sealing of the shots.
3. The centrifugal, hanging-arm, novel, effective and multifunctional shot blasting wheel impeller is adopted, which has a large shot blasting quantity, high efficiency, and rapid replacement of blades. It also has the function of integral replacement, and easy maintenance.
4. The adoption of full-curtain BE mode shot-residue separation machine, greatly increases the volume and efficiency of separation, and shot blasting quality, and reduces the wear of the shot blasting machine.
Modle | Workpiece size mm | Work speed m/min | Blasting rate kg/min | Purpose |
QZW50 | F15~50*12000 | 0.5~5 | 150*2 | Out wall clean |
QZW200 | F50~200*12000 | 0.5~5 | 220*2 | |
QZW1000 | F200~1000*12000 | 0.5~4 | 250*4 | |
QZW2000 | F1000~2000*12000 | 0.5~3 | 320*4 | |
QZW3000 | F2000~3000*12000 | 0.5~3 | 320*6 | |
QZN3000 | F500~3000 | 0~2 | 400*2 | Inner wall clean |
Picture of steel pipe shot blasting cleaning machine from our successful project:
Our company is professional manufacturer of all kinds of shot blasting machine ,sand/grit blasting room ,dust catcher etc,we have more than 30 years experience in surface treatment field
We can design machine according to the size of workpiece or the ruquest of machine. about electricity we can do 220V~450V,frequency50~60Hz,if you have special request,advise us please!
Our company has be granted ISO and CE.
Products are sold to more than 30 provinces and cities throughout China, and also exported to Bolivia,Australia,Mexico,Peru,Finland,Holland ,Bulgaria ,Czech,Indonesia, Iran, Vietnam ,India,Russia,Turkey, Philippines and Malaysia etc
International cooperation:
30 years of manufacturing experiences in shot blasting machine,more than 20 designers and engineers,company owns NC laser cutting ,planomilling,NC bending machine,NC machine center,balancing device,analyzer and other advanced production and test equipment to make sure the machine accuracy and quality,which give the support to our customers to get the best quality machine
shot blasting cleaning equipment for steel pipe out wall
