Detailed Product Description
Used in granite automatic grinding line
Technical form
| Grain | No. |
| 36# | 3311 |
| 46# | 3312 |
| 60# | 3313 |
| 80# | 3314 |
| 120# | 3315 |
| 180# | 3316 |
| 240# | 3317 |
| 320# | 3318 |
| 500# | 3319 |
Why adopt nylon 612?
Nylon 612 can retain rigidity and tenacity in humidity circumvents .With adding water ,the other kind of nylon will be softening and loss rigidity .Nylon 6/66/610 comes from biology and petroleum polymer without consistent quality .Nylon 612 with lower bibulous and density characteristic is the best filament for abrasive brush .
Why does it adopt wave shape filaments?
Strengthening the elastic of the filaments, to guarantee the best polish effect of our brush.
Make the filaments separate each other, more uniformity grinding on the stone surface.
Increasing the hardness of the filaments, improving the polish efficiency.
Decreasing the possibility of filaments broke off because of centralized, guarantee the best life of our brush.
How to identify the quality of brushes?
The filaments cannot brush off during working.
The filaments fixed to the frame with high strength stainless steel wire prevented from corrosion.
Filament should be bended wave shape.
The silicon carbide grit in the filaments shouldnt break off because of the wave shape filaments.
The appropriate height and density of the brushes.
The filaments should have the good wave resilience.
The filaments should have the long life.
Is longer life ok by higher filaments?
Not allowed, because the life of brush depends on the making craft, filaments quality and right using method.
If adding the height of the filaments unwisely ,then wont guarantee the rigidity, it will fall down during working ,so filament side over grind and cause them thin ,then will rapture earlier and loss their life .
What's the effect for granite after grinding ?
The granite after grinding ,have the uneven archaized effect ,showing the nature light ,and could have the antifouling and skid prevention. wishing to get the above effect ,before the grinding it must be dealt with the flaming pan . and so on surface; first using steel brush removing the surface and fix it ,then using the abrasive brush from thick to thin ,until to get the satisfied effect .
What's the effect for marble after grinding ?
Most marble could get the antique effect directly dealing with it ,showing the nature light ,and could have the antifouling and skid prevention. As some stone before grinding ,according to need and structure ,dealing with in advance in physical methods ,then using the grit no from thick to thin to grind it, until the pan could get the satisfied effect .
