Welcome to ECBAY
CNC-402A injector cleaner and tester
CNC-402A injector cleaner and tester

CNC-402A injector cleaner and tester: 1. Ultrasonic cleaning 2.Sprayability test,Leakage test,Injecting flow test 3.On-vehicl

CNC-402A injector cleaner and tester :


CNC-402A is an advanced electromechanical product, which can clean and test Auto engine injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Feature:* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbondeposits on the injector completely.* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitorthe spraying status of each injector with the help of backlight. This test is also for reverse flush.* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. * Injectingflow test: To check the injecting amount of the injector in 15 seconds of constant injection. * Auto. test: Totest injectors by simulating different working conditions.* On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning onthe injectors on vehicle.

Specification:* Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.* Input power: 250W;* Ultrasonic cleaner power: 100W;* Simulated RPM range: 109990rpm; step: 10rpm;* Time range: 19999s;* Pulse width: 0.525ms; step 0.1 ms;* Fuel tank capacity: 4700ml;* Dimensions: 385mm×410mm×500mm;* Weight: About 35kg

CNC-402A injector cleaner and tester

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.