Nanjing SF Chemical Equipment Co., Ltd. [China]

1.AAC block machine 2.Reasonable price 3.top-notched configuration 4.High efficiency with good quality

1, Aerated concrete cutting machine

The annual output of 50,000 m3 or more.  4 × 1.2-7.5 type is a new generation of full-aerated concrete cutting machine, step for the implementation of the green body, six-sided flip cut, because of its advanced technology, not the second hoisting, reduce the body damage for lifting. The equipment technical indicators reached the JC / T 921-2003 "autoclaved aerated concrete cutting machine" standards.

2, Jaw crusher

Processed the massive lime into a certain amount of granular.

3, Ball Mill

Special equipment by putting the already broken good block calcined lime to the ball mill for processing a certain fineness again.

4, Stir casting machine, mortar blender, vortex slurrying machine

the stir casting machine pouring into mobile form (with power 20.7KW) and fixed (with power 18.5KW) two kinds of casting methods. Used for the slurry, cement, lime, gypsum and aluminum paste suspension a certain ratio of injected into the tank for mixing, adequate response and timely inject slurry mixture into the mold frame. Intensity and time of mixing in the tank has a great influence in the quality of aerated concrete.

Fixed casting machine structural characteristics:

Adopt propeller agitation, form a strong vortex in the tank, destroy lime particles coated so as to achieve full uniform mixing. Adjust lift height with the casting arm while casting process to prevent splashing. The machine system in accordance with technical requirements for fixed and mobile. the stationary type divided into fixed and suspension type, can meet user needs.

Mixing use spiral type, mixing the solid material and slurry in a short time. Mortar mixer (with power 7.5KW), eddy current pulp machine (with power 7.5KW) according to the users materials, equipment configuration is different, with a reasonable configuration.

5, Aluminum powder mixer

Blade run up with high-speed, the aluminum powder and water mix sufficiently for burdening.

6, Stevedoregear and mould

Can be recycled and put into use. stevedoregear contain automatic and general sides, mating with two-hook two-hook car, using for demould and lifting the green body, the structure using hydraulic thrusters, four pothooks operates automatically.

7, Die shoe

Four sides with square welded steel, capped with 8mm thick steel plates to strengthen and prevent damage to the green body deformation.

8, Model frame

Two kinds of activities and overall style. Side plate with double hollow for heat preservation, the inside chosen 10mm welded thick steel plate to increase its steel and prevent deformation, extending the life cycle.

Specification(blank dimension before cutting)6.05×1.54×0.65mm 4.25×1.54×0.65mm  4.25×1.24×0.65mm  3.95×1.24×0.65mm

9, Steam car

Use 140 × 140 × 6 square-shaped tubes welded together, and matching with the die shoe, model frame, accurate installation to make the body smooth, support mold frame combination, with smooth light movement. Wheelbase: 600mm or 730mm.

10, Upright support

For the die shoe up and down stacking, adopt rectangular structure, enhance the stability of the upper and lower floor, to prevent damage to the green body.

11, Ferry car

Transport the mold and finished products. Walking speed of 24m/min, gauge 2445mm, with power 2.2KW.

12, Autoclave

The steel horizontal cylinder-type device. Tank cover is made of whole 16MnR pressed steel block, tank cover flange, autoclave body flange using 16MnR whole kettle forged. Pressure parts weld heat treatment and strict non-destructive testing according to relevant standards.

13, Boiler

14, single-beam single-hook car

15, other

(1) lime, cement metering tank (2) measurement of the slurry tank (3) screw conveyor and other equipment and processes supporting production.

16, Silo, non-standard components.

Cubic Aerated Concrete Block Device Configuration Table Major Equipment List