plate heat exchanger : high efficiency, small heat waste, compact and light construction, small floor space, convenience to The plate heat exchanger is composed by a group of metal bellows plates,with holes on metal plates,and the heat transfer is carried out by the two flowing liquids in these holes. The plate is installed between a frame plate and a pressure plate, tightened with lock bolt.seal gasket is installed on the plate,to seal the channel and guide the liquids into the channels alternately. The number of plates is determined by the physical properties, pressure drop and temperature of the liquids.supports the pressure drop on plate.
Main technology parameters
| Specification | BR 0.05 | BR 0.1 | BR 0.2 |
| Monolithic heattransfer area (2) | 0.05 | 0.1 | 0.2 |
| Slab size( mm) | 500¡Á168 | 660¡Á250 | 970¡Á330 |
| Slab thickness(mm) | 0.8 | 0.8 | 0.8 |
| Angle hole dia(mm) | 38 | 60 | 75 |
| Pipe fittings dia(mm) | 28 | 38 | 46 |
| Corrugation shape | Herringbone corrugation | ||
| Corrugation spacing (mm) | 10 | 12 | 12 |
| Average boardSpacing (mm) | 3.8 | 4.2 | 4.2 |
| Combined heatexchanger area(2) | 0.5~5 | 4~10 | 10~38 |
| Maximum workingPressure (mpa) | 0.4~2 | ||
| Upper limiter ofworking temperature (c) | Commonly about 120~160c ,Particularly can be 250c | ||
| heat transfercoefficient (W/m2 c) | 2000~6000 | ||
Sanitary stainless steel Plate heat exchanger
