Activated Carbon Adsorbed material for adsorbed natural gas (ANG) and pressure swing adsorption (PSA)
Activated Carbon
Item | Content |
Bulk density g/cm3 | 0.2~0.35 |
Water ≤ m% | 5% |
Grain size ≤ | 300 mesh |
Width and ratio of micro pore | 12nm,≥90 |
Specific surface ≥ m2/g | 2000 |
Volume of micro pore ≥ cm3/g | 1.2 |
Volume uptake V/VCH4 at 25,3.5MPa | 90~110 |
Molding product
Item | Content |
Bulk density g/cm3 | 0.2~0.35 |
Water ≤ m% | 5% |
Shape | ≥Φ2mm cylindrical or other shape |
Width and ratio of micro pore | 12nm,≥90 |
Specific surface ≥ m2/g | 2000 |
Volume of micro pore ≥ cm3/g | 1.2 |
Volume uptake V/VCH4 at 25,3.5MPa | 110~130 |
Use:
ANG: The product is mainly used in adsorbed natural gas, and it can be used in adsorbed natural gas vehicle.
PSA: This product can be used in PSA for separating mixed gas, such as the separation of air and the recycle of H2 and CO2.
Use way:
The product must be dehydrated 6 hours at 110 in vacuum drier or it must be atmospheric dehydrated 24 hours before use, then it can be used for ANG and PSA, after it is packed in storage tank.
High surface activated absorbed material Activated Carbon
