Silicone Additives for Plastics (LYSI-100),material.
Silicone Additives for Plastics (LYSI-100) .
LYSI series silicone additives are white pellets or white powder, which are made from ultra-high molecular weight polysiloxane.It is the new-generation products of traditional liquid siloxane, which is difficult to be mixed evenly and processed.And it is mainly used by plastics as processing aids, such as the lubrication of PE, PP, PS, PA, ABS, PC, POM, PBT, PPS, PPO and etc.While remove off the disadvantages of troubles and performance on the processing of lubricant such as traditional silicone oil and fatty aid, it is has many advantages_safe to be used, easy to be mixed and stable performance.Generally speaking, it can be mixed with thermoplastics at any proportion among the range of 0.1%-0.5%.The specific functions are as follows:Obviously, improve the processing flowability and demoulding.When injecting and extruding, it can reduce the screw torque, cut down the consumption, improve the productivity and extend the useful life of equipments.Obviously, low down the frictional coefficient, improve the smoothing and surface luster.It has better silk touch and wearable performance.Especially, it is applied for high lubricant POM, wearable nylon, silicone core layer, cable compounds, PP-R, PE pipe and etc.Good stability, little migration.For example, about the glass shatters reinforced plastics, it can reduce effectively the exposure, improve the surface luster and be easy for molding.About the high mineral filling plastics, it can make up the loss on mechanic performance caused by the high filling and improve the appearance as well.With improved fire resistance and lower smoke rate, it is the flame-retardant synergist of the halogen-free flame retardant-Mg (OH) 2/AL (OH) 3.Lower surface adhesion;Lower products' stress to avoid the warping;The surface painting can not be influenced.Model and technical parameter:Model
Performance LYSI-50 LYSI-50A LYSI-100Appearance White pellets White pellets White powder Active ingredient% 50 50 100Carrier resin PE EVA Dosage% 1-5 1-5 0.2-2.0Application PE\PP\PA\ABS\PC\POM\PBT\PPS PE\PP\PA\EVA\ABS\PC\POM\PBT\PPS All resins Examples Modified plastics, high luster products, halogen-free flame retardant, large thin wall products, process of high adhesive resins, elastomer, BOPP film, silicone core pipe, halogen-free flame retardant cables and etc.Method of application:After mixing with resins directly, it can be extruded or molded.Palletizing is also can be made before molding.Dosage:When dosage is between 0.2%-2.0%, it can improve the processability, flowability and demolding.When dosage is between 1.0%-3.0%, it can improve the surface performance.( smoothing, luster, resistance to wear and etc)The dosage of LYSI-100 should be 0.2%-2.0%.
Silicone Additives for Plastics (LYSI-100)
