the same material as oregon' saw chain control the whole produce process.
| . |
the same material as oregon' saw chain control the whole produce process.
Detailed Product Description1. gauge: .043",.050" 2. kick-back and low kick-back 3.Oregon number:91VG 91VS 3/8"Low profile .050" (A1) Recommended bar length: up to 18" (46cm)
· Depth gauges help reduce kickback without affecting performance
·Advanced heat treatment and chrome processes allow for improved cutter performance.
·Engineered for precision, balance and low vibration
·Tie straps help keep oil where it's needed - on the chain
·Oil holes help carry oil around the full length of the guide bar's groove
• Each chainsaw chains have been alone testing to ensure quality
Part Number | OREGON NUMBER | PITCH | GAUGE |
A1 | 91VS | 3/8" | .050"/1.3mm |
3/8"LP .050" (A1FT) Recommended bar length: up to 18" (46cm)
·A1FT is a low-kickback chain
PART NUMBER | OREGON NUMBER | PITCH | GAUGE |
A1FT | 91VG | 3/8" | .050"/1.3mm |
3/8"LP .043" (A0) Recommended bar length: electrical saws: up to 16" (41cm) gasoline saws: up to 14" (35cm)
•Intended for a limited group of professional and commercial users such as arborists, utility/construction workers or landscapers.
·Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
·Tie straps help keep oil where it's needed - on the chain
· Oil holes help carry oil around the full length of the guide bar's groove
·Advanced heat treatment and chrome processes allow for improved cutter performance.
·Each chainsaw chains have been alone testing to ensure quality
PART NUMBER | OREGON NUMBER | PITCH | GAUGE |
A0 | 90SG | 3/8" | .043"/1.1mm |
| Our products'performance compared with Oregon and Stihl | ||||
| Specification | test for tensile strength | |||
| OREGON | STIHL | E&S | ||
| 3/8 .050 | 5650-5850 | 5655-5790 | 5600-5850 | |
| .325 .050 | 7400-7560 | 7410-7570 | 7400-7460 | |
| 3/8 .058 | 7650-7800 | 7650-7900 | 7580-7730 | |
| .404 .063 | 10560-10780 | 10565-10800 | 10460-10630 | |
| Cutter hardness | ||||
| HRC | hard chromium plating | |||
| Times | STIHL | OREGON | E&S | E&S |
| 1 | 54.56 | 56.09 | 55.54 | 64 |
| 2 | 54.98 | 56.94 | 55.76 | 63.52 |
| 3 | 55.22 | 56.51 | 54.91 | 63.27 |
| 4 | 54.73 | 56.49 | 56.17 | 63.87 |
| Our raw material is SAE8660, being imported from America , | ||||
| which shares the same brand number with OREGON. | ||||
| we control the whole process from raw material to package, keep high strictly qualitly | ||||
saw chain 0.404" / 0.325" / 3/8"
