Detailed Product Description

Alumina Lining Brick are high grade milling media made by advanced cool isostatic pressing technology and fired at high temperature.

In order to catch the rapid increasing demand of grinding media and provide full series to customers, we have developed grinding media with 90% Al₂O₃, 92% Al₂O₃ ,95% Al₂O₃  and 99% Al₂O_3. The technical data of each series is listed as following table.

With overwhelming merits in higher density, more regular shape, easily classifying and assorting, superior grinding efficiencies and competitive price prior to natural cobblestones and conventional grinding media, Alumina grinding media is excellent for grinding processing of ceramic bodies and glaze materials in tile industries and surface polishing of the ceramic bearing applicant.

Cm³.

Technical Index of Lining Brick

Item	90series	92series	95series	99series
Al2O3 (%)	90	92	95	99
Compressive Strength(KN/Grain)	9	11	13	15
Bulk Density (g/ cm3)	2.80	3.0	3.1	3.2
Water Absorption( %)	7	6	5	5
Color	White	White	White	White
Application	Glaze or Tile body Milling	Glaze or Tile body Milling	Glaze or Tile body Milling	Glaze or Tile body Milling
Raw Materials	Calcined Alumina	Calcined Alumina	Calcined Alumina	Calcined Alumina
Forming method	CIP	CIP	CIP	CIP

RECTANGLE (STRAIGHT) Brick

Length	150	150	150	150	150
Width	50	50	50	50	50
Height	40	50	60	70	100

TRAPEZOID (TILTED)BRICK

Length		150	150	150	150	150
Width	W1	45	45	45	45	45
	W2	50	50	50	50	50
Height		40	50	60	70	100

Note: Length in 75mm, 37.5mm, 18.75mm are all available.

   Width 58/50mm means upper width is 50mm, and the bottom width is equal to 58mm.

Calculation Method for Alumina Lining Brick

Rectangle bricks used on end face

G_A=3.14×r²÷ (L₁×W)

G_A: Amount of rectangle brick   r: radius of cylinder (cm)

L₁: Length of lining brick (cm)    W: width of lining brick (cm)

HALF RECTANGLE BRICKS USED ON END FACE

G_B=D÷W

G_B: Amount of half rectangle brick     D: diameter of cylinder (cm)

W: width of rectangle brick (cm)

DOSAGE OF RECTANGEL BRICKS AND TRAPEZOID BRICKS ON CYLINDER OF TUBE BODY

G_C=R₁×R₂

R₁=3.14×D÷W

G_C: overall amount                 R₁: rank amount on cylinder

R₂ Amount of one rank              D: diameter of cylinder (cm)

R₂= (L-2h) ÷L₁

H: height of brick (cm)            L: length of cylinder (cm)

W; width of lining brick (cm)      L₁: length of lining brick (cm)

Correct installation method

1.       Before installation, all the partial remaining bricks, cement and rust on the inner surface should be cleared, Uneven parts should be patched, and the smooth surface be made hoarse to increase the cohesion with cement.

2.       The installation gap should be within 1mm, using425 white cement and 107 glue as adhesive.

The installation should begin with the end faces; two end faces are both made up of rectangle bricks and half rectangle bricks. After the installation of end faces, then for cylinder installation, the cylinder is installed above all, then the trapezoid bricks followed, and so on alternate to ensure the bottom of bricks cling to the inner wall of the cylinder closely. If the rectangle bricks can not be installed properly, the flake bricks can be used to fill up and white cement is used to fill in the gap.