sand mold casting: 1. According to standard ASTM, EN, DIN, JIS, or sample, or drawings. 2. Best selling in Europe, America sand mold casting is a cast iron mould which is used for solidification of molten steel in order to form a special ingot. Ingot mould is an essential and turnover bulk producing equipment. It impacts both the outsurface and inner quality of the ingots. 1. Material: cast steels GS45 DIN1681 2. Mechancial properties:
Tensile strength | min. 230MPA |
Yield strength | min.450MPA |
Elongation | Min.20 |
Reduction of area | Min.35 |
3.Delivery condition: normalized
4.Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.The standard documentation ensures the full traceability of every process step:Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition,Mechanical properties and non-destructive examination;Dimensional check supported with a “as-built“ sketch;Record of the quality heat treatment
sand mold casting