Detailed Product Description
Tanker Chemical,Oil hose, chemical hose, composite hose
CONSTRUCTION:
It is a multi-layer thermoplastic hose made from Polypropylene, Polyethylene and Polyester films and Polypropylene fabrics, with a weather-proof and abrasion resistant outer cover made of Polymeric coated Polyester abric. Outer cover is also available in a special PU coated fabric; its UV, Ozone, Sunlight and weathering resistance, offers superior temperature and abrasion charactwieristics.
All the different layers are wrapped together and tensioned between internal and external wire spirals. This enables our product to meet the requirement of the Petrol-chemical industry and those of the oil tank truck industry.
WIRE: Galvanised carbon steel inner wire (G)
Galvanised carbon steel outer wire (G)
also available with 304 Stainless Steel internal or external wires 316 on request
COLOUR: Blue/Red/Black
It is manufactured according to the requirement specified by the European Standards EN 13765:2003 Type 3 (BS 5842:1980).This flexible, economical and lightweight hose complies with EN 13765-2003. The transfer of many acids and alkalies, cloronated hydrocarbons, aromatic fuels, alcohols, and petroleum products. Tanker hose is used in tank truck, railcar, in-plant, chemical refinery and other industrial applicationstank . All hoses are 100% aromatic resistant, antistatic and can be used for suction or discharge. Vacuum rating is 0,9 bar, according to the EN ISO 7233 method B. | ||||||||||||
Safety | ||||||||||||
The hose assemblies are tested at 1 ½ times rated working pressures for safety and reliability, in accordance with BS 5842:1980 clause 6.4(EN ISO 1402). Full test certification can be supplied on request.The working pressure is based on a safety factor of 4:1 Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms,as required by BS 5842:1980 clause 6.2 (EN ISO 8031) ,with a special outer antistatic black cover. | ||||||||||||
Work Temperature | -30~+100 | |||||||||||
| ||||||||||||
MODLE | SIZE | Maximun W.P | Min Burst (ENISO 1402) | Bend Radius | Weight | |||||||
| mm | Inch | Bar | PSI | Bar | PSI | mm | Inch | KG/mt | Lb/Ft | ||
TGGP-025L | 65 | 2.5 | 10 | 150 | 40 | 600 | 150 | 6 | 2.3 | 1.5 | ||
TGGP-030L | 75 | 3 | 10 | 150 | 40 | 600 | 200 | 8 | 2.5 | 1.7 | ||
TGGP-040L | 100 | 4 | 10 | 150 | 40 | 600 | 380 | 15.2 | 3.8 | 2.5 | ||
End Fitting: Males(BSP/NPT) Females Flang(ANSI/DIN/GB)
Each hose assembly is permanently marked on the ferrule at one end according to EN 13765:200, EN13766, BS5842, BS3492, BCH, CMO, CCS, Bv and so on.
