mul t lock

Mul-T-Lock Pick for Rim Cylinder

3rd Generation Mul-T-Lock Opening ToolProduct features and adjustment instructionsThis tool is especially designed for opening Classic pin, Floating pin and Side pin High Security MUL-T-LOCK cylinders, which includes Rim cylinders, Mortice cylinders, Profile cylinders, Padlocks and auto mobile gearbox locks.Product features:1.       This tool utilized a precision pin locating method. The needle nose is locked in each of the chambers. Operator can concentrate on picking each of the pins then wasting time in aiming at the bottom of the pins.2.       Other MUL-T-LOCK tools have a problem with pick trapped by the pins inside a plug. Our 3rd Generation MUL-T-LOCK opening tool will travel freely inside the plug without trap by the pins.3.       This tool gives you positive signal on each of the pins when they are moving. You almost cantell the length when picking.4.       Like every other tools, you have to practice to gain experience. Within an hour or two hour of practice, you can open locks like a expert.Adjustment:You need to be sure the pick needle is in perfect alignment all the time. The best way to check alignment is to insert this tool into a empty plug (the plug must have the tailpiece cover securely tighten at the end, which act as the tool stopper.) Push the tool all the way in till it hits the tailpiece cover and stops, push the needle is at the center of the chamber, if no, remove the tool from the plug, unscrew the needle holding hex screw with the supplied Allen key and adjust accordingly. Make sure the tool can travel freely inside an empty plug and the angle of the needle nose can travel beyond the bottom and the top of the key way. Demo DVD in detailed teaching is together with this tool.

Please contact us for more information and the price.

Mul-T-Lock Pick for Rim Cylinder