1. Germany technology 2. AAC cutting machine,block machine(AAC production line) 3. Siemens Electronic Component
Autoclaved Aerated Concrete Production Line
The aerocrete produces the technological process:1. The raw materials store in the material storehouse (or stores the pot) after dealing with reserve such as lime, cement, gypsum, sand (or fly ash)2. Aluminum powder or aluminum lotion is through dealing with the reserve material for use3. Raw materials measure according to certain matching by electron balance measure, aluminum powder, water put into aluminum powder mixer is it is it suspend the liquid to make to mix after measuring4. The batching water (cold water or hot water pitcher hot water) is measured by the electronic water balance 5. Put into and pour among the mixers in certain order after, raw materials, aluminum powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould)6. Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang from upset hoist upset 90° after the base body reaches certain intensity, the drawing of patterns is cuta. The base body carries on the side and cuts and mills the trough verticallyat firstb. Then carry on the vertical level to cutc. Cut horizontally finallyd. Cut good base body, raises to cauldron car go on one yard of shelves organize into groups to steam to transport to hang to drive a vehicle to load7. Raise products well, produce after the cauldron breaking the board off with the fingers and thumb by the board breaking off with the fingers and thumb machine to steam8. Pile from finished product hoist or forklift to finished product field pile the buttress according to specification to carry9. Steaming and raising the car and side board and entering the next board of circulation and returning after, the finished product is unloaded, with upset hoist mould frame association that drawing of patterns get off, restore 90°return to pour mixer pour again after clearing up
Service
1.Production Line Design. Including: drawing of plant working process , drawings of land construction, drawings of power working, drawings of driving force for working, drawings of anti-dust, drawings of water supply and drainage, and drawing of air pipeline construction.2.Technical Guidance of Building FactoryIncluding: consultation of facility, Equipment installation guide, constitution the production preparation, etc.3.Providing the technical information of setting up factoryIncluding: part of the factory management system, all posts accountability of production line, process rules, safety rules, setting a quota of staff and posts, pre-production tools directory, laboratory instruments, product catalogs, and test methods.
Contract Information: Tel: 86-519-89883750
Fax: 86-519-89883760
Mobile: 86-13775230604
Hydraulic Block Separating Machine For AAC Block Making Plant
