Xinxiang Blower Factory Co., Ltd. [China]

1.industrial ventilation blower fan 2.Dynamic balancing tested Impellers,low noise 3.to operate and install easily

Cell: + 86 18790673640   skype: recycling000

Company profile:

XinXiang blower factory CO., LTD.

We have more than 30 years experience .we get ISO9001 certification and more than 200 workers. the aera of factory is 41500 square meters.

Our factory strength: we have more than 100 sets main equipments to make different kinds of blowers,

Double column numerical control vertical lathe

NC =numerical control.NC cutter machine.

straddle truck. Or double column type truck.

dynamic balancing machine.

VSR=vibratory stress relief.rotor.

The main products are :anti-corrosion fan.

special for metallurgy fan.

special for annealing furnance fan.

impeller:blade. brick kiln dedicated fan

We export to Korea,Tailand , Vietnam ,Indonesia ,Malaysia ,Pakistan ,south Africa etc

Details of blowers:

1. Applications

 This type of  fans are generally used for the air conveying and draughting of different types of biomass boilers.

2. Structure

   Main parts:Case,Impeller,Motor, protective screening.

 fans can be divided into10 specifications according to the impeller angle,  each type of blades can be mounted by 15°, 20°, 25°, 30°, 35°

3. Production Parts:

The standard configuration of this type of fans are generally consist of the following product parts:

case, impeller, air inlet, motor, system integral pedestal, main shaft, driving system (bearing house, bearing), coupling

4. Parameters of Product Performance 

5.  maintenance of blowers

Blowers can run based on complete normal conditions

Please check every part of blower is regular or not after repairing.

Clearing fan and gas pipeline internal dust at regular period, dirt and impurities such as water, and to prevent rust

Repairing cannot going at running period.

6. Notes

If the discovery of flow is too large, and not fit for the request or short time need to smaller flow, can use the throttle device adjusted.

Inspect the thermometer and oil mark sensitivity at regular period.

If there is off-normal occurrence happen when blower drive, stop and rotate,should repair it as soon as possible.

if there is small glitch, should check it, and repair it.

In addition to every time after repairing should be oil change outside, still should be regularly oil change

 7. Producing utility

CNC Plasma Cutting Machine

Cases Welding

Dynamic Balancing Adjusting

8. Certificate

CE ,ISO9001

9. Export Record:

Romania, Saudi Arabia, Egypt, Iran, Philippine, Vietnam and Russia

10. Order Requirement:

We will appreciate it a lot if you can offer us your product performance requirements and operation environment, so that we can customize optimal production to meet your every requirement.

1) Air volume

2) Total Pressure or Static Pressure

3) Voltage and Frequency

4) Medium Temperature and Density

5) Altitude of Operation Place

 11. Export Market Distribution

12. Installation requirement:

1.       when Install the blower, the weight of the gas transmission pipeline should not be add in the casing, according to the drawings corrective air inlet and impeller gap between size, and keep axis horizontal position

2.       When Install air inlet pipe, you can directly use air inlet itself bolt connection, the air inlet of fixed by three countersunk screw

3.       Diffuser be installed into a certain Angle, back cover properly rotary can keep plate in a horizontal position.

4.       After installation, rotating rotor by hand or lever, checking whether there is too close or collision phenomenon, in the absence of these phenomena when square test run

industrial ventilation for 9-10 D Blower Fan