SIECC WE-Worktable press brake/bending machine for 5meter/6meter/8meter
WE press brake 1).press brake,plate bending machine 2).Hydraulic,NC,WE worktale 3).Side/back protect device
SIECC WE-Worktable press brake/bending machine for 5meter/6meter/8meter
Main technical parameter for WE67Y 400t/5000
| Nominal Force of The Ram | 4000KN | ||||
| Working Table Length | 5000MM | ||||
| Upright Colum Distance | 4100MM | ||||
| Throat Depth | 450MM | ||||
| Max. Stroke of the Ram | 900MM | ||||
| Max. Open Height between the Table and Ram | 580MM | ||||
| Speed for The Ram | Empty | 80MM/S | |||
| Working | 10MM/S | ||||
| Return | 80MM/S | ||||
| Main Motor | Type | Y225S-4 | |||
| Power | 37KW | ||||
| Speed | 1480R/MIN | ||||
Main Character | |||||
| 1.1.All Steel Welded, Vibration eliminate stress, high mechanical intensity, good rigidity.Hydraulic upper | |||||
| transmission, steady and reliable. | |||||
| 1.2. Mechanical stop dog, synchronization in twist axis, high precision. | |||||
| 1.3.Back gauge distance, upper ram stroke can be adjusted by motor-drive,manual operation micro-adjust | |||||
| equipment, numerical display. | |||||
| 1.4.WE WORKTABLE full deflection compensation | |||||
Main Component | |||||
| 2.1.NC display: AUTONICS Korea | |||||
| 2.2 Main Seal: PARKER | |||||
| 2.3.Main electronic element: Siemens/Schneider | |||||
| 2.4 Main Motor: micro & special motor(built-in spindle nose) | |||||
| 2.5 Group valev: Taifeng/Omega | |||||
| 2.6.Conjugate internal gear pump: Shanghai Chenjie/Hang fa(Hardly wear&nosie and structural durabilities) | |||||
| 2.7.Back gauge:Steel cemented carbide(with fine adjustment device &8pcs of lift rod device) | |||||
| 2.8.Mould material:T8A | |||||
| 2.9.Oil cylinder:Jiangsu Jianhu Huaxing | |||||
| 3.0.Front Plate Feeding will be equipped | |||||
| 3.1.Standard Upper and Down Mould | |||||
Detail makes the perfect:
SIECC WE-Worktable press brake/bending machine for 5meter/6meter/8meter
