pipe bending equipment:equipted with cooling system, closed cooling without fouling,thermal efficiency, less energy consumption.
Bending mode | IF inductive heating, hydraulic push-type pipe(include stereotyped elbow bending) | |
Tube elements | ||
Maximum external diameter of bending tube | 250mm | |
Maximum length of bending tube | 2000mm-3000mm | |
Minimum external diameter of bending tube | 89mm | |
Maximum thickness of bending tube | 25mm | |
Minimum thickness of bending tube | 5mm | |
Material | Low carbon steel, medium carbon steel pipe, low alloy steel pipe, stainless steel tube. | |
Bending pipe parameters | ||
Bending angle | 0-1800 | |
Minimum straight section length between two bending | No more than 350mm | |
Radius of bending | 2×OD~5×OD | |
Bending speed | 0.2~4mm/s continuously adjustable | |
Mecium-frequency power | ||
Mecium-frequency generator | SRC 3-phase full-controled bridge parallel inverter. | |
Input voltage | 3-phase 380V 50Hz | |
Rated output power | 160KW | |
Output frequency | 400~1KHz | |
Control mode | Single Board program control | |
Control funtion | ||
Funtion of automatically display bending angle and bending speed, bending stop automatically, inductive heating temperature. |
Medium frequency pipe bending equipment