pre-bending the end of plate hydraulic 4-roller bending machine rolling into round, cone and other shapes.
MODEL | TXW12-16*2500 |
Maximum width of bending plate | 2500mm |
Maximum thickness of bending plate | 16mm |
Maximum thickness of pre-bending | 12mm (please check if it can meet your demand) |
Diameter of upper roller | 300mm |
Diameter of bottom roller | 280mm |
Diameter of side roller | 240mm |
Yield stress of plate | 245 MPa(please confirm if this is equal to or higher than your plate) |
Min diameter when full loading | About 600 |
Plate bending speed | 4m/min |
Main drive | 11kw |
Voltage | As the customer required |
Remark: please check the above information to make sure we quote the right machine. The yield stress of your plate is very important, because it is related to the selection of machine model. Besides, please also check the minimum inside diameter and pre-bending thickness to avoid possible mistakes. Thanks. | |
1. Hydraulic-driven, high efficiency(driving power equivalent 60% traditional)
2. Permanent lubrication(during bearing life period without refueling)
3. Clamping pressure is adjustable(non-existence of skidding, productivity is 50%-80% more than traditional)
4. Rolling diameter can catch 1.1 times of the top roller
W12 4-Roller Plate Bending Machine
