1.Universal CNC Spring Washer Machine 2.Wire diameter:0.1--0.88mm 3.High speed and high accuracy 4.Used to make all springs
Dongguan Automatic Universal CNC Spring washer machine
Feature
1)XD-CNC208 is equipped with two servo motors for cam and wire-feed capable of making variety of extension springs.2)The spring which is not completed the hooks can be sort out.
3)Equipped with angle probe to accurate hook position.
4)Machine auto stop when encounter errors and messages display on monitorHigh efficiency:
Electronic units improve each step of the production. Mechanical regulation parts can be easily accessed. Parts prone to wear are limited to a minimum and their replacement has been rendered even easier. Automatic lubrication greatly prolongs the machine life.
Economy:
The machine works without compressed air and is operated by a single electrical motor. The standard equipment includes all the components necessary to the production, such as wire swift, tooling, spring container and some spare parts. The machine consists of one single piece and thus installation on the site is very quick and easy. The hard metal parts, manufactured with great precision, last for a long time.
Technique Parameter
Model | XD-CNC208 |
wire diameter | 0.1--0.88mm |
Max.O.D. | 20mm |
Max Production Speed | 550pcs/min |
Feed Length | Unlimited |
Feed Speed | 1200m/min |
Feed (Y)Axis(kw) | 0.75KW |
Cam (Y)Axis (kw) | 0.75KW |
Machine Dimensions | 90*85*160cm |
Wooden Case Dimensions | 100*105*175cm |
Machine Weights | 500kg |
Gross Weighs | 600kg |
Power | 220V 3P 50/60Hz |
Operating mechanism maintenance
1.Turn off the power.
2. In the use cotton fabric cleaning organization and the radio station the thing, and spreads guards against rust the thin oil.3. Slide precision slide object, do not use high-viscous oil, using only the slide oil lubrication, so as not to affect the linear movement of the slide.
4. Every six months separately to organization on 1-4 Yellow glib increase bearing grease. 5. Note: Do not use the air spray gun cleaning song hand and slide, in order to avoid the debris, dust and slide chute or the clearance of the rotary structure.
Gear-driven lubrication system
Gears lubrication of the system is divided into x and y axes, and the oil tank is just touching the tooth surface. Oil is not much more, so as to avoid motor oil and fuel tank for 6 months to check 1 timesEvery six months, the replacement cycle oil maintenance, and implemented in accordance with the following steps: Note: The new machine using the full 1000 hours, please be sure to update the new cycle oil.
Dongguan Automatic Universal CNC Spring washer machine