24V manager system BMS Passive Bleeding Balancing BMS (50-100A)
1. Dimension: 60*64*21mm 2. Discharging Current: 10~200A 3. Balancing current: 80mA~2A 4. Capacity balance
Specification of 4S Passive Bleeding Balancing BMS (50-100A)
| 1. Single Cell Over Charge Protection Voltage | 4.35V±50mV |
| 2.Battery Pack Over Charge Protection Voltage | 17.4V±0.2V |
| 3.Battery Pack Over Charge Release Voltage | 17V±0.2V |
| 4.Single Cell Over Discharge Protection Voltage | 2.5V±80mV |
| 5.Battery Pack Over Discharge Protection Voltage | 11.2V±60mV |
| 6.Battery Pack Over Charge/Discharge Protection Release Condition | Disconnect All Load to Recover to Normal State |
| 7.Maximal Continuous Discharging Current | 15A |
| 8.Maximal Pulse Discharging Current | 30A |
| 9.Maximal Charging Current | 10A |
| 10.Battery Pack Over Discharge Current Protection Detection Current | 100A±4A |
| 11.Battery Pack Over Charge Protection Detection Maximal Delay Time | 3 seconds |
| 12.Battery Pack Over Discharge Protection Detection Maximal Delay Time | 1 second |
| 13.Battery Pack Over Discharge Current Protection Detection Maximal Delay Time | 20 milliseconds |
| 14.Balancing System Working Static State Consume Current | 200 uA(The voltage of each cells is 3.6V above.) |
| 15.Balancing System Working Static State Consume Current | 20 uA(The voltage of each cells is 2.5V below.) |
| 16.Impedance | 0.1mΩ(The voltage of each cells is 3.6V above.) |
| 17.Dimensions | (Length)32X(Width)50X(Thickness)13mm |
| 18.Weight | 60 g |
| 19.Apply to | 4 LiNiCoMn2O4 Cells in Series |
| 20.The voltage of each cells equalization precision | ±5mV---±40mV(The coherence of each cells capacity between±3%0,0.2C discharge testing method) |
| 21.The maximal temperature ascent of balancing system module | Less than 15°C |
| 22.Working temperature range | —20°C-----+85°C |
Wiring:
24V manager system BMS Passive Bleeding Balancing BMS (50-100A)
