Piezoresistive MEMS PC Board Mountable Accelerometer Millivolt Output,Low Cost Designed for PCB or Adhesive Vibration/Shock
Piezoresistive MEMSPC Board Mountable AccelerometerMillivolt OutputLow Cost
DESCRIPTIONThe Model 3022 is a piezoresistive silicon accelerometer packaged in a ceramic substrate with a sealed ceramic cover. The ceramic provides an excellent bonding surface for the customersapplication specific adhesive. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams change their resistance as the motion of the suspended mass changes the strain in the beams. Silicon caps on the top and bottom of the device are added to provide over-range stops. This design provides for a very low profile, high shock resistance, durability andbuilt-in damping over a wide usable bandwidth. For an accelerometer with a mounting bracket designed to bolt the sensor to a mounting location, see the Model 3028. Please refer to the Models 3052 and 3058 for accelerometers
with integral temperature.
FEATURESDesigned for PCB or AdhesiveMounting±0.5% Non-linearity (typical)DC ResponseGas DampingBuilt-in Over-range StopsLow PowerAPPLICATIONSVibration/Shock MonitoringModal AnalysisMotion ControlImpact TestingTransportationcompensationStandard Ranges (g)
±2 ±50 ±5 ±100 ±10 ±200 ±20
High quality and accuracy piezoresistive silicon accelerometer 3022
