Yaskawa motor from 450KG to 1600KG 60m/min-150m/min,gearless applicable only for lift
Rated Output*1 | Rated load Elevator speed | 450 kg | 630 kg | 800 kg | 1000 kg | Motor rated speed*1 | |
45m/min | 2.1kW | 2.9kW | 3.7kW | 4.6kW | 90min-1 | ||
60m/min | 2.8kW | 3.9kW | 4.9kW | 6.2kW | 120min-1 | ||
90m/min | 4.2kW | 5.8kW | 7.3kW | 9.2kW | 180min-1 | ||
120m/min | 5.5kW | 7.7kW | 9.8kW | 12.3kW | 239min-1 | ||
Sheave shaft load | 15,700N | 24,500N | |||||
Motor frame No. | 160ES | 160EL | Sheave Dia 480mm | ||||
Mounting method | Foot-mounting | ||||||
Protection mode | Open mode (equivalent IEC IP21), except for brake and encoder (PG) | ||||||
Cool method | Refrigerant around the air, free, circulation cool method (IEC IC0A1) | ||||||
Power supply (inverter input power) | 200V (50,60Hz), 400V (50,60Hz) | ||||||
Applicable inverter | With current vector control (d-q sheave / q sheave control) inverter | ||||||
Max. torque | 200% (corresponds with the inverter capacity) | ||||||
Rated time | S2-30min | ||||||
Thermal classification | 155 (F) | ||||||
efficiency | ≥80% (7.7kW) | ≥83% (12.3 kW) | |||||
Noise | Below 60 dB (A) | ||||||
Environmental conditions | location | Indoor (non-corrosive gases,combustible gas,dust place) | |||||
temperature | -10 ~ +40 °C | ||||||
humidity | Below 95%RH (no condensation) | ||||||
altitude | Below 1000m | ||||||
Encoder (PG) *2 | 4,096 P/R | ||||||
Brake | Electromagnetic brake (dual brake) DC:48V (excitation)/24V (keeping) | ||||||
Spray color | Mensel color label 6.2PB 3.6/15.0 | ||||||
*1 Rated output in this table are calculated as 80% of total system efficiency
*2 Sample portfolio table of Encoder and invert as showing below: please pay attention the interface between inverter and encoder
Output method | Pluses | Encoder option | |
Yaskawa invert, current vector invert | LINE DRIVER | 4096 | A+B+Z |
OP AMP | 2048 | SIN, COS |
Yaskawa motor
