Welcome to ECBAY
LED for Car door laser shadow lighting instruction
LED for Car door laser shadow lighting instruction

1.Voltage:DC9-24V 2.Decorative lights 3.Emitting color:green,blue,red 4.Philp 3W led chip 5.working tem

Car shadow light 


2.Decorative lights 

3.Emitting color:green,blue,red 

4.Philp 3W led chip

5.working temperature: -40°C-105°C

6.Dimension:L7*2.8W cm.As the decoretived shadow light,when you stop the car,shadow could be showed on the road .Bring more driving fun to drivers


1.Environment friendly and power saving.

2.Durable and non-fading brilliant beams.

3.Elegant exterior packaging

4.Power Cable Length:

Light for Power cord: 2.0Meters

Light for control wire : 4.0 Meters

5.Designed for auto modification fancier. 

 User Manuel: 1. This product is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers; 2. The product can be installed at the body kit, chassis or other suitable place; 3. Special design cause the product with strict waterproof and thermal performance,which will make sure the normal service in various harsh environment Installation: 1. Make sure the position for installing, It can be installed on the coaming and chassis or other right  position; The best projection distance is 30mm for the projection light. 2. Fixed the stand of the projection light on the Car with a screwdriver. 3. Adjust the lamp holder to the best position.Tighten the fixed-screw at the bottom of the light cup. 4. Connect the power cord and remote control according to the installation guide. Attention:  

1.  We strongly suggest installing this product by Professional Automobile Modify Factory or Workshop. The manufacturers disclaim all responsibility for belongings or personal casualty caused by improper installation or misuse. 2.  Our company does not responsible for the legality of installing this product,please  confirm with the vehicle management department for the record  before installation ;

3.   Please access the positive and negative poles of the power through voltage regulator   rectifier. Do NOT direct access to car battery.



More auto logos can be custom-made.

LED for Car door laser shadow lighting instruction

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.